REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (W203, 2000 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	W203
		Introduction
		Instruction Manual
		Routine maintenance
		Engine
		Cooling and heating
		The power supply system and release
		Electric motor
		Manual gearbox
		Automatic Transmission
		Coupling and power shafts
			Clutch
			The propeller shaft
			Power shafts of wheels
			Differential
				Dismantling and assembling differential
				Disassembly and assembly of the main transmission gearbox and adjustment of backlashes of gears
				Determination of the thickness of the shim and installing it in the gear housing
				Check and adjust the clearance of the flange
				Dismantling and assemblage of automatic locking differential
		Brakes
		Suspension and steering
		Body
		Onboard electric

printable version

Check and adjust the clearance of the flange

Check and adjust the gap between the flange 33 and the bevel gear of the drive shaft 17 by a retaining ring

Check the clearance between the flange (33) and a bevel gear drive shaft (17). If necessary, install the retaining ring (30a) thinner or thicker. The thickness of the locking ring varies from 1.4 mm to 2.7 mm and a pitch of 0.05 mm. The gap between the flange and the differential housing: 0.03 - 0.3 mm.

« previos page
Determination of the thickness of the shim and installing it in the gear housing

next page »
Dismantling and assemblage of automatic locking differential