add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (W203, 2000 issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz W203
Home
 
Mercedes-Benz
W203
Introduction
Instruction Manual
The main bodies and the control / monitoring
Locks, keys and locks. The uniform lock
Protection against theft
Facilitate entry and exit of the car
Seats
Security Systems
The steering wheel, mirrors
Memory Seat, steering wheel and outside mirrors
Dashboard
Multifunction steering wheel, all-purpose display
Switches
Automatic heating and air conditioning. Ventilation. Independent heater
Rear Defrost
Power windows, sunroof
Salon Equipment
Driving a car and auxiliary systems
Warning signal and warning lights, as well as reports on the information display for the fault
First aid kit, fire extinguisher, tools, warning triangle and spare wheel compartment. Sealing punctured tires
Routine maintenance
Engine
Cooling and heating
The power supply system and release
Electric motor
Manual gearbox
Automatic Transmission
Coupling and power shafts
Brakes
Suspension and steering
Body
Onboard electric
 


Hit Counter by Digits


print page printable version

First aid kit, fire extinguisher, tools, warning triangle and spare wheel compartment. Sealing punctured tires



First aid kit

First-aid kit is located behind the left side trim in the luggage compartment.

Opening: Turn the catch (2) and move the side trim (1) to the side.

Remove the retaining tape (3) and remove the first-aid kit (4).

Regularly check the contents of the kits for completeness.

Fire extinguisher

The fire extinguisher is located in front of the driver's seat.

After each use a fire extinguisher should be filled. Check fire extinguishers should be performed every 1-2 years.
Removing extinguisher:

Handle (1) Pull up and remove the fire extinguisher (2).

Warning triangle

The warning triangle is located in the stowage well under the boot floor.

Turn right foot to the right (2).

The left foot, turn left (3).

Extend the legs (4).

Both sides turn up the reflector (5) and connected to each other by means of a button.

Additional compartment under the boot floor

1 Models with collapsible spare tire.
Spare tire is foldable
2 Warning triangle
3 Fixing screw spare wheel cover / vehicle tool kit
4 Office for the vehicle tool kit

Removing the spare tire folding

Remove warning triangle with bracket.

Fixing bolt turn left and take out the collapsible spare tire.

Remove the vehicle tool kit.

Remove warning triangle with bracket.

Fixing bolt turn left and, if necessary, remove the collapsible spare tire.

Vehicle tool kit

Vehicle tool kit is in the stowage well under the boot floor.

1 Models with sealing means TIREFIT: sealing means TIREFIT
2 Car jack
3 Compressor
4 wheel bolts for collapsible spare tire
5 Underride guard
6 Towing eyelets
7 centering pin for aluminum rims
8 Key for wheels

TIREFIT means for sealing punctures tires

Small punctures, particularly in the tread can be sealed with sealing means TIREFIT.

Trapped in the tire foreign objects (eg screws or nails) as far as possible do not remove.

TIREFIT sealing means can be used at an ambient temperature to about -20 ?� C.

Sealing tires

Cock a lay brake.

Manual transmission switch to 1st gear or reverse gear, automatic transmission - to "P".

The sealing means TIRIFIT and enclosed sticker with the inscription ?�max km / h?� (?�max. 80 km / h." Remove from the trunk.

Put a sticker on the dashboard in the driver's field of vision.

Shake the cylinder several times.

Hose (1) screw on the cylinder.

The container with sealing means TIREFIT then opened.

Remove the valve cap from the tire valve.

The spool valve unscrew the device for loosening valves. Do not place the spool valve on the sand or mud.

Remove the cap from the hose.

Push the hose onto the tire valve.

Holding tank hose down to compress it.

Squeeze the entire contents of the cylinder to the bus.

Remove the hose and screw the valve spool in the tire valve to stop using the device for the unscrewing of valves.

By unscrewing the valve device attached to a spare spool valve.

Plug the hose stub.





« previos page
Warning signal and warning lights, as well as reports on the information display for the fault
next page »
Routine maintenance

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.