 printable version
Salon Equipment
Interior lighting
 | |
1 - diffusers rear
On and off shades in the rear compartment: press the button.
2 - Front right light for reading
On and off the lamp for reading: press the button.
Right illuminating to read is enabled or disabled.
3 - Enable automatic function: Press the rocker switch.
Ceiling and remain off when the car is unlocked, the door is opened or removed the key from the ignition switch.
4 - Enable the automatic function:
Turn the key switch to the middle position.
If the key is removed from the dark of the ignition switch, ceiling lamps are switched on and off with a time delay.
Plafonds off if in the dark one opens the door. When you open one of the front doors the ceiling in front of the cabin, opening the back door of one of the ceiling are included in the back.
If the doors are closed, ceiling lamps are switched off with a time delay.
If the car is unlocked in the dark, the ceiling lamps are switched on and off with a time delay.
5 - Turning the front ceiling manually:
Click on the key switch. As long as the switch is pressed on the keyboard, front dome included.
Turning off the ceiling: Push the switch to a position 3.  |
The dwell time, after which the ceiling should be shut down after removing the key from the ignition switch can be set in the menu ?�LIGHTING?� (lighting) of the "individual setting" on the setup menu ?�INT. ILLUMINATION DELAYED SWITCH-OFF ?�(OFF interior light with time delay) (Section multifunction steering wheel, universal display).
When a door is open, and finding the key to the 0 or removing its ceiling turned off after about 5 minutes after all the electronic equipment of the car shifted to its original state. |
6 - front left light to read: press.
Left lamp for reading off or shuts down.
Sun visors To protect against glare front: Sun visors fold down.
To protect against the glare from the side window: Remove the sun visor from the holder (1) on the inside and take aside. | Clamping pocket (2) is, for example, for the storage of cards. |
Cosmetic mirror 1 - the illuminated vanity mirror in the sun visor
Opening: the sun visor should be fixed in the holder (2). Pull the cover (3) up. Lighting (4) is activated.
To close: lower lid down.
Boxes and armrests
Glovebox
Storage compartment can be unlocked and locked emergency key. 1 - Unlocking
2 - Locking
3 - Glovebox
4 - Handle
Opening: Pull the handle (4) and open the glovebox.
Note: The cover of the glove compartment is compartment for glasses.
Radio / COMAND system with CD-changer: CD-changer is in the glove compartment.
The box in the center console 5 - The box in the center console
Opening: slide the back cover.
Closing: Slide the cover forward. | The department before the console armrests are lighter, compartment for coins and drink holder. |
Boxes under the armrest
Models with automatic air-conditioning or automatic air conditioner with comfort control 6 - Box armrest (for your phone)
7 - Box under the armrest
Opening: pull the button (6), raise the armrest.
Closing: Pull down the armrest and secure. | The compartment cover is a storage compartment for plastic cards. |
Models with automated heating system 7 - Box under the armrest
Opening: pull the button (7), raise the armrest.
Closing: Pull down the armrest and secure.
Note for models with automatic air-conditioning:
The box may air conditioning (Section Automatic heating and air conditioning. Ventilation. The independent heater).
The temperature in the box may rise, due to limited space. Therefore, when transporting the heat-sensitive cargo must close vents the included heating.
Models with automatic air-conditioning:
Vents in the glove box, do not cover objects.
Changing the tilt of the armrest
(models with automatic air-conditioning or automatic air conditioner with comfort control) Armrest lift to the desired position without squeezing the buttons (7). To lower, pull the button (7).
Drink holder 1 drink holder in the glove compartment in the center console
Opening: slide the back cover.
Closing: Slide the cover forward.
Ashtrays
Average Console
Opening: Press lightly on the bottom edge of the cover, ashtray opens.
Removing the insert Models with Manual transmission: Gear lever switch to 2nd gear
Models with automatic transmission:
Make the switch on D.
Ashtray press forward (1) until its release from the locking position. Remove the insert.
INSERTION
Click on the box until it locks.
Rear Opening
Grasp the top of the lid, pull it - ashtray opens.
Removing the insert
Hold the cover (2), press down and pull out the insert.
INSERTION
Install the insert and seal.
Cigarette lighter 1 cigarette lighter in the center console
The cigarette lighter is located in the center console storage compartment in the center console. | The ashtray is in front of the AT selector lever / gear shift gate. |
The key in the ignition switch, turn to position 1 or 2.
Press in cigarette lighter: jumping out automatically as soon as a glowing spiral.
Plug the cigarette lighter socket can be used to connect elements of special equipment.
Service telematics ?�Mercedes-Benz?� (system TeleAid, DynAPS, FCD)
If you have a dynamic tracking system (system DynASP) and the system of "floating" vehicle data FCD (Floating Car Data):
If you are registered as a user of services, telematics services ?�Mercedes-Benz?�, central dispatching of transport and technical services regularly and automatically transmits through your radio free short messages (SMS).
In the case of the use of PrePaid cards prepaid (for the use of mobile phones without the conclusion of a corresponding contract with the provider) services such transmission of the above short messages (SMS) to be paid by deduction from the amount on your card.
Phone - the basics
Using a mobile phone in the car is only permitted if they are connected to a separate external antenna.
The time delay switch off the phone
If the key is removed from the ignition switch, the phone stays on for about 10 more minutes (time delay).
If during this time you use your phone, the phone is switched off about 10 minutes after the end of the conversation.
Change the time delay switch off the phone:
Additional entries in the phone book the phone off delay time can be varied in a range between one and sixty minutes. (Enter entries in the phone book - a separate "Guide for your phone").
When the indication ?�NACHLAUFZEIT?� (delay time) and enter the number of rooms (minutes) between "1" and "60". If you have not entered a number or enter the wrong number, and then the actual delay time of approximately 10 minutes.
Cordless phone in the armrest
Installing phone  | |
Open the compartment for the phone in the armrest.
Enter the phone in the bottom of the tabs (1) the receptacle (2). In front of the phone, press down (3). The flap (4) is automatically fixed, moving to the right.
Only in this position the phone is connected to the hands-free unit.
(Using the phone via the multifunction steering wheel - see. Section multifunction steering wheel, universal display).
If you are not fully charged the charging process is activated as soon as the key is inserted into the ignition switch. | The receptacle (2) is suitable for the following phones: NOKIA 5110, NOKIA 5130, NOKIA 6110, NOKIA 6130, NOKIA 6150.
|
Using a mobile phone via the control panel radiotelephone
Removing the phone together with the holder: the receptacle (2) to remove the phone up (6) of the lock holder (5).
Setting the phone with the holder: the receptacle (2) with a phone, insert (7) in the lock holder (5), and press down until it clicks shut.
Using the Telephone The receptacle (2) has the function of the handset (arrow) to conduct telephone conversations.
(The use of the phone - a separate "Guide for your phone"). | The function of the handset is off the phone as long as it is inserted into the receptacle (2).
Maintenance of telephone conversations is only possible through the handset (arrow). |
Removing phone The flap (4), move to the left until it locks. Phone, remove forward.
The wireless phone on the dashboard
Installing phone Enter the phone in the bottom of the tabs (1) the receptacle (2). At the top of the phone, click on the forward (3). The flap (4) is automatically fixed, moving to the right.
Only in this position the phone is connected to the hands-free unit.
If you are not fully charged the charging process is activated as soon as the key is inserted into the ignition switch. | The receptacle (2) is suitable for the following phones: NOKIA 5110, NOKIA 5130, NOKIA 6110, NOKIA 6130, NOKIA 6150. |
Using a mobile phone via the control panel radiotelephone Removing the phone with the receptacle: the receptacle (2) to remove the phone back (6) of the lock holder (5).
Setting the phone with the holder: the receptacle (2) with a phone, insert (7) in the lock holder (5), and press forward until it clicks shut.
Use of telephone: The receptacle (2) has a full feature handset (arrow).
Handset off as long as it is inserted into the slot (2).
Removing phone The valve (4) to move the lock. Telephone remove upwards.
Safety net for luggage space in the front passenger footwell
Safety net for luggage is available only for the transport of light load.
Heavy and fragile items and items with sharp edges can not be transported in a safety net for luggage.
Safety net for luggage can protect the goods in the event of an accident.
Roof Rack Rack mount only front rails of the roof between the markings (1), and behind only in the groove (2) rubber strip.
Folding rear bench seat Folding
Push head restraints and fold them back (Section Seats).
Pull the release handle (1), fold the seat cushion (2) forward.
Pull the lever (3) and release the seatback.
The back seats fold down (4).
Set back in a seating position
The back seats fold back until it locks.
Fold the seat cushion back.
If necessary, lift up the headrest and place. At the back is uncommitted in the release lever to lock indicator is visible (5).
Rules download
The dynamic properties of the laden vehicle depend on the distribution of cargo.
Therefore, the load of the car is made in accordance with the figure.
The total weight of cargo, including passengers, must not exceed the full weight of regulatory and load capacity of the bridge.
Place a heavy load on the front lower part of the trunk.  | |
The load slide to the back of the rear seats folded forward or to the seat cushion.
The load of any kind must be fixed mounting means having sufficient tensile strength and abrasion resistance.
Sharp edges secure the soft material.
The means of attachment can be purchased at any service station ?�Mercedes-Benz?�.
Device for securing cargo
In the trunk there are fixing lugs.
Secure the luggage using eyelets.
For fixing the cargo do not use elastic bands or meshes, as they are intended only for protection from moving lighter loads.
The means of attachment can not be carried over sharp edges or corners.
Sharp edges secure the soft material.
Removing and installing rear shelf Withdrawal
Unhook the straps (1).
Pull back the rear shelf (2).
Setting
Hook the rear shelf in the mounting plate.
Attach the straps to the tailgate.
Plug-drawbar
(Towing a trailer - see. Section Driving and auxiliary systems).
(Mounting dimensions and load given in the "Specifications"). | To purchase a spare key required number. |
Number key
Spare key can be purchased at the station ?�Mercedes-Benz?�.
Removing a cover The plug (1) on the bumper, remove the bottom and remove.
Removing the socket Press release (3) and socket (2), remove the socket mounting ball head down.
The ball head is in the spare wheel in the additional compartment under the boot floor.
Setting the ball head Key (4) into the ball head lock and turn counterclockwise.
Pull the handle on the ball head and turn clockwise until it locks. The white dot on the ball head coincides with the red zone on the handle. Ball heads enter vertically into the receptacle of a spherical head to its automatic locking. The handle is automatically rotated so that the green area (5) on the handle coincides with a white marking on the ball head. The key in the lock, turn in the direction of the arrow (lock).
Remove the key and push the protective cap.
There is a risk of an accident!
When driving with a trailer ball head must be locked and the key removed. Only in this case provides protection from tripping ball head while driving.
If the ball head can not be locking and taking out a key, remove and clean the ball head. If, after clearing the ball head mount (lock) can not refer to one of the service stations ?�Mercedes-Benz?� to check the towing device as a whole.
In this case, you can not use a trailer towing hitch for towing a trailer as it does not provide reliable operation. Secure socket (2) in the socket fastening on the ball head. | When not using the trailer coupling is recommended to dismantle the ball head. |
Removing ball head
Press release (3) to the socket (2) and remove the socket with a spherical head.
Remove the protective cap in the handle and the lock unlock key (4).
Holding the ball head, pull the handle up and turn clockwise until it reaches the red zone, and fixing.
Remove the ball head down.
Insert the socket (2) into the mounting ball head and press until it locks.
The plug (1) Push the top and lock by pushing the bottom. | Pay attention to the reliability of the landing receptacle (2). |
Keeping the ball head
Ball head with inserted into it the key lay in a nest in a spare wheel.
Recommendations for care A dirty to clean up the head ball and socket mounting ball head, so that at any time, were provided with light installation and removal. | You can not clean the ball head unit for car washing jet of high pressure, do not use solvents. |
After cleaning, apply a thin layer of oil or grease to the following places:
1 locking balls,
2 guide pins,
Three guide surfaces,
4 holiday lever
5 the ball head and the ball head on the bracket on the vehicle.
Castle lubricate it with acid and tar oil.
Trailer with 7-pin plug The connector between the vehicle with 13-pin receptacle and trailers with 7-pin connector, can be achieved via an adapter cable.
Adapter cable can be purchased at any service station ?�Mercedes-Benz?�.
1 Projection
2 groove
Setting
Lift the cover. Insert the plug protrusion into the groove and turn to the right. Give the lid snaps.
Adapter cable free secure trailer straps to secure the cable.
Mains power supply
Your vehicle has the ability to connect to the power supply from the vehicle network. If the trailer is required by the car's power supply, you must install the appropriate fuse (Head the Onboard electric equipment).
| 
