add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (W203, 2000 issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz W203
Home
 
Mercedes-Benz
W203
Introduction
Instruction Manual
The main bodies and the control / monitoring
Locks, keys and locks. The uniform lock
Protection against theft
Facilitate entry and exit of the car
Seats
Security Systems
The steering wheel, mirrors
Memory Seat, steering wheel and outside mirrors
Dashboard
Multifunction steering wheel, all-purpose display
Switches
Automatic heating and air conditioning. Ventilation. Independent heater
Rear Defrost
Power windows, sunroof
Salon Equipment
Driving a car and auxiliary systems
Warning signal and warning lights, as well as reports on the information display for the fault
First aid kit, fire extinguisher, tools, warning triangle and spare wheel compartment. Sealing punctured tires
Routine maintenance
Engine
Cooling and heating
The power supply system and release
Electric motor
Manual gearbox
Automatic Transmission
Coupling and power shafts
Brakes
Suspension and steering
Body
Onboard electric
 


Hit Counter by Digits


print page printable version

Multifunction steering wheel, all-purpose display




Buttons on the multifunction steering wheel depending on the configuration of your car can be made to the universal call to display the following systems management and setting their parameters:

1 - meter run from the date of discharge and the total mileage counter
Coolant temperature
Digital display of speed
Indicator Maturity planned maintenance (ASSYST)
Indication of the level of motor oil
2 - Audio
Radio
CD Player
Cassette deck
3 - Navigation system
4 - Memory fault indication
5 - Individual installation
6 - Trip computer
Since the start
Since reset
Power reserve
7 - Phone

Button or Press long until the desired system will be displayed. With each push of a button is indicated by the following system.

In some systems, a further indication may be invoked by pressing or .

Indications on the universal display, depending on the settings made in German, English, French, Italian or Spanish. Switching to another language - see. Menu (dashboard) of the "individual setting" Setup menu "TEXT" (Written).

Regardless of the language, on models with the Audio 10 Radio, CD AUDIO 10 APS or Audio 30 display audio systems (radio, CD player, cassette deck), and the indication appears on the phone in English.

1 - Universal Display
2 - multifunction steering wheel
Turn the key in the ignition switch in position 1 or 2.

Press button:

3 - The following system
4 - Previous System
5 - The following indication within the system
6 - Previous display within the system
7 - Increase the volume
8 - Reduction of the volume
9 - Set the phone number, receiving incoming phone call
10 - The end of a telephone conversation, the rejection of the incoming phone call reception
11 Beep on soft cover

Button or Press long until the desired system will be displayed.

With each push of a button is indicated by the following system.

In some systems, additional display can be called by pressing the button or .

Measuring run, the indicators period TO and signage - speed, coolant temperature and oil level

1 - Reset the meter run from the date of discharge (See below.)
2 - Coolant temperature (See below.)
3 - Digital speed display - if the system "Individual setting" in the menu (dashboard) in the setup menu (display selection) is set to (outside temperature) (see . below)
4 - Indicator Maturity planned maintenance (ASSYST) (Head Routine maintenance)
5 - Indication of the level of motor oil (Head Routine maintenance)

1) With the exception of the UK

Button or Press long until the display meter run from the date of discharge and the total distance meter (1).

Button or Press long until the desired indication (2, 3, 4, 5, 1).

Pressing or displayed the next or previous system.

Audio

Depending on the audio system appears corresponding enabled the display.

Radio - display for audio devices and the COMAND

1 - No audio is not included
2 - Included radio
3 - established the band and, if necessary, additional memory number
4 - Name of the tuned radio station or its frequency
5 - (memory) - if the system "Individual setting" in the menu (CAR) in the setup menu (by pressing the button in AV mode) is set to ( memory), NOT (search for radio stations)

Turn on the radio (separate "Instruction Manual").

Button or Press long until the display (2).

Button or Press long until the desired radio station will be displayed or frequency.

Press or can be selected radio station frequency or stored radio station. It depends on the setting in the settings menu (by pressing the button in the "AUDIO") (see. "Individual setting" menu (CAR)

Pressing or displayed the next or previous system.

CD - display for audio devices

CD - for the COMAND display

1 - No audio is not included
2 - CD included
3 - In the CD changer is indicated by the number of the playing CD
4 - Number of musical works

Turn on the CD player (separate "Instruction Manual").

Button or Press long until the display (2).

Button or Press long until the desired number will be indicated by a musical work (4).

Pressing or displayed the next or previous system.

Cassette - Audio display for 10

1 - No audio is not included
2 - Switch on the cassette deck
3 - the losing side

Turn on the tape deck (separate "Instruction Manual").

Button or Press long until the display (2).

Press button - Rewinding is done before the next piece of music.

Press button - Rewinding is performed before the playing of music.

Pressing or displayed the next or previous system.

Navigation system - display for Audio 30 APS and COMAND system

1 - The navigation system is turned off
2 - The navigation system is turned on, but the tracking of the target is not performed
3 - The navigation system is turned on and activated target tracking

Button or Press long until the desired system will be displayed.

(The navigation system - a separate "Instruction Manual" system COMAND (Cockpit Management and Data System) or Audio 30 APS).

Pressing or displayed the next or previous system.

Memory fault indication

1 - No malfunction
2 - The number of faults
3 - In memory fault indication stored fault

Button or Press as long as the memory of the display will indicate the fault.

If appears (2) Press or . This is followed by sequential fault indication.

(Warning and alarm systems fault - see. Section Warning signal and warning lights, as well as reports on the information display for the fault)

At the end of the fault indication appears again (2).

If a fault occurred during the movement, the indication (2) will appear again when the key is in the ignition switch is turned to position 0 or removed. Repeated fault indication on the dashboard, you can call by pressing the reset (Section Instrument panel).

When you turn the key in the ignition switch in position 1 or 2 memory reset fault indication.

If the fault re-emerged, they are displayed again in the memory fault indication.

Pressing or displayed the next or previous system.

Individual installation

1 - Basic displays the individual installation
2 - (SETUP) - in this submenu, you can call the desired menu: (dashboard) (See below.)
(LIGHT) (See below.)
(CAR) (See below.)
(HEATING) (See below.)
(comfort control) (See below.)

Each menu is, in turn, further sub - menu settings. They can then be made the appropriate settings.

3 - Reset the additional menu (SETUP), a request for confirmation (See below.)

4 - Confirmation message

Button or Press long until the basic display of the "Individual setting" (1).

Button or Press as long as will be indicated by an additional menu (SETUP) (2)

Button or Press long until the desired menu is marked:

(dashboard) (See below.)
(LIGHT)

(CAR) (See below.)

(HEATING) (See below.)

(comfort control) (See below.)

Pressing or displayed the next or previous system.

Reset menu (SETUP) (2):

If you reset the menu (SETUP) (2), all the settings again become the factory setting.

Call the basic display of the "Individual setting" (1) or the (SETUP) (2)

Reset button on the dashboard (Section Instrument panel), press and hold for about 3 seconds. The indication (3).

Repeatedly press reset. For confirmation appears (4).

If reset button is not pressed, after about 5 seconds to the main display of the "Individual setting" (1). In this case, the menu settings are not reset.

When reset while driving for safety reasons in the menu (lighting) and (CAR) are not reset all the setup menu (See below.).

Menu "dashboard"

1 - Basic displays the individual installation
2 - (SETUP) - an additional menu to select the menu
3 - (SET TIME) (hours) 1
4 - (SET TIME) (minutes)
5 - <12/24 O'CLOCK> - 12-or 24-hour display
6 - (INDICATOR TEMPERATURE) - set the unit of measurement is displayed on the outside temperature display on the dashboard, and on models with automatic air conditioning with comfortable control and display of the system
7 - (the displayed value B) - setting is valid for all indications on the universal display (not for the speedometer)
8 - "TEXT" (text language) - the language for display on the universal display
9 -

On the block diagram of an example of a possible setting.

1 Only models without the COMAND or without Audio 30 APS. (The system COMAND or Audio 30 APS - separate "Operating Instructions").
2 Except UK.

Button or Press long until the basic display of the "Individual setting" (1).

Button or Press as long as will be indicated by an additional menu (SETUP) (2)

Button or Press until until marked menu (dashboard).

Button or Press long until the desired menu is indicated with the installation (2-9).

In the setup menu (3, 4) by pressing the button or It sets the time and in the setup menu (5-9) to select the desired setting.

The selected setting is marked.

Produced settings remain stored and executed immediately.

Following the completion of the setup menu is displayed again the basic display of the "Individual setting" (1).

Pressing or displayed the next or previous system.

Reset menu (dashboard) (5-9) to the factory setting:

Call one of the setup menu (5-9).

Reset button on the dashboard (Section Instrument panel), press and hold for about 3 seconds. The indication (10).

Repeatedly press reset. To confirm the indication (11).

If reset button is not pressed, after about 5 seconds is indicated by an additional menu (SETUP) (2). In this case, the menu settings are not reset.

Menu "Lighting"

1 - Basic displays the individual installation
2 - (SETUP) - an additional menu to select the menu
3 - (SWITCHING headlights) (Section Switches)
4 - (lighting for orientation) (Section Switches)
5 - (OFF SLOW headlights (Section Switches)
6 - (interior light is off delayed) (Section Windows, sunroof)
7 - Reset menu (LIGHT), a request for confirmation (See below.)
8 - Confirmation message

In the block diagram above shows an example of a possible setting.

Button or Press long until the basic display of the "Individual setting" (1).

Button or Press as long as will be indicated by an additional menu (SETUP) (2).

Button or Press until until marked menu (lighting).

Button or Press long until the desired menu is indicated with the installation (2-6).

In the setup menu (3-6) setting is selected by pressing a button or . The selected setting is marked.

Produced settings remain stored and executed immediately.

Following the completion of the setup menu is displayed again the basic display of the "Individual setting" (1).

Pressing or indicated by next or previous system.

Reset menu (LIGHT) (3-6) to the factory setting:

Call one of the setup menu (3-6).

Reset button on the dashboard (Section Instrument panel), press and hold for about 3 seconds. It appears (7).

Repeatedly press reset. To confirm the indication (8).

If reset button is not pressed, after about 5 seconds is indicated by an additional menu (SETUP) (2). In this case, the menu settings are not reset.

When reset while driving for safety reasons installation menu (PAR light switch) is not reset. The message (LIGHT WHILE DRIVING not been fully relieved the factory setting).

Menu "car"

1 - Basic displays the individual installation
2 - (SETUP) - an additional menu to select the menu
3 - (speed limits, TYRES winter tread pattern) "1 - constant speed limiter (Section Driving and auxiliary systems).
Choice of models with petrol engine "Off." "240 km / h" to "160 km / h" in steps of 10 km / h.
Choice of models with diesel engine: "Off." "210 km / h", "190 km / h", "160 km / h."
4 - (by pressing the button MODE AUDIO) - the radio installation
(search for radio stations) - Button or selectable frequency
(MEMORY) - Button or selects stored radio
5 - (Automatic door locking) (Section Locks, keys and locks. The uniform lock)
6 - Reset menu "car", asked to confirm (See below.)
7 Confirmation message

In the block diagram above shows an example of a possible setting.

Button or Press long until the basic display of the "Individual setting" (1).

Button or Press as long as will be indicated by an additional menu (SETUP) (2).

Button or Press until until marked menu (CAR).

Button or Press long until the desired menu is indicated with the installation (2-5).

In the setup menu (3-5) desired setting is selected by pressing a button or . The selected setting is marked. Produced settings remain stored and executed immediately.

Following the completion of the setup menu is displayed again the basic display of the "Individual setting" (1).

Pressing or displayed the next or previous system.

Reset menu (CAR) (3-5) to the factory setting:

Call one of the setup menu (3-5).

Reset button on the dashboard, press and hold for about 3 seconds. It appears (6).
Repeatedly press reset. For confirmation appears (7).

If reset button is not pressed, after about 5 seconds is indicated by an additional menu (SETUP) (2). In this case, the menu settings are not reset.

When reset while driving for safety reasons installation menu (speed limits, TYRES winter tread pattern) is not reset. The message (CAR WHILE DRIVING DO NOT FULLY reset to factory defaults).

Menu "Heating"

1 - Basic displays the individual installation
2 - (SETUP) - an additional menu to select the menu
3 - (independent heater)
4 - (independent heater, on time of 1 - hours) 1, 2
5 - (independent heater, switching time 1 - minutes)
6 - (OPTIONAL HEATING UNIT) 3
7 - Reset menu (HEATING), a request for confirmation
8 - Confirmation message

In the block diagram above shows an example of a possible setting.

1) Only models with independent heater
2) Appears only when the setup menu (3) (independent heater) chosen

Always only one can be selected on-time (for more information - see. "Independent heater", Section Automatic heating and air conditioning. Ventilation. The independent heater).

Menu "Convenience operation" (models with memory function)

1 - Basic displays the individual installation
2 - (SETUP) - an additional menu to select the menu
3 - (ACTIVATE LANDING SYSTEM FOR PROMOTION) (Section facilitate entry and exit of the car)
4 - (SETUP) (DEPENDING ON KEY) - if set to (ON.), All settings made in the menu system "Individual setting", can be entered into memory, depending on the key. (Memory function - see. Section position memory seats, steering wheel and exterior mirrors)
5 - (ADJUSTING THE MIRRORS PARKING) (Section steering wheel, mirrors)
6 - Reset menu (comfort control), a request for confirmation (See below.)
7 - Confirmation message

In the block diagram above shows an example of a possible setting.

Button or Press long until the basic display of the "Individual setting" (1).

Button or Press as long as will be indicated by an additional menu (SETUP) (2).

Button or Press until until marked menu (comfort control).

Button or Press long until the desired menu is indicated with the installation (2-5).

In the setup menu (3-5) desired setting is selected by pressing a button or . The selected setting is marked. Produced settings remain stored and executed immediately.

Following the completion of the setup menu is displayed again the basic display of the "Individual setting" (1).

Pressing or displayed the next or previous system.

Reset menu (comfort control) (3-5) to the factory setting:

Call one of the setup menu (3-5).

Reset button on the dashboard (Section Instrument panel), press and hold for about 3 seconds. It appears (6).

Repeatedly press reset. For confirmation appears (7).

If reset button is not pressed, after about 5 seconds is indicated by an additional menu (SETUP) (2). In this case, the menu settings are not reset.

Trip computer

1 - - meter run from the start
2 - - meter run from the date of discharge
3 - (power reserve) - indication of the fuel in the fuel tank with an approximate indication of the distance that can be passed with the available supply of fuel
4 - Run from the start or reset in km or
5 - Time since the start or reset or
6 - The average speed since the start or reset or
7 - The average fuel consumption since the start-up or reset or

Button or Press long until the display (1, 2 or 3).

Button or Press long until the display meter run since the start of (1) meter run since reset (2) or indication of fuel reserve (3).

Pressing or displayed the next or previous system.

When recalling the trip computer always appears meter since the launch of (1).

Reset the meter run since the start of (1) or meter run since reset (2)

Press or call the appropriate indication (1 or 2) and pressing reset on the dashboard (Section Instrument panel), wait for reset to "0".

When you turn the key in the ignition switch to 0 or removing approximately 4 hours automatically reset the meter run since the start of (1) if, within that time, the key is not turned back into position 1 or 2.

Phone

Phonebook - display for audio devices

Phonebook - indication for the COMAND

1 - Switched off.
2 - Enter the code PIN (personal identification number) card SIM - a separate "Guide for your phone" or respectively "Operating Instructions" of the system
3 - searches for the appropriate telephone network
4 - Telephone is ready for operation. Indicated by the relevant GSM network provider
5 - At the moment the car is out of range transmission or reception
6 - Read phone book stored in the phone card or phone. Length - 30 seconds
7 - Selected from the phonebook surname
8 - The number of the caller, the process begins dialing
9 - The process of dialing over and displayed surname. Indication is maintained throughout the call,
10 - Signal Strength - the right of the display for models with audio devices: the higher the number, the stronger the received signal is a GSM network
The strength of the signal - the left on display for models with system COMAND: The more bars indicated, the stronger the received signal to the GSM network
11 - Number of memory
12 - Display of call duration

You must include phone and audio device or system COMAND.

Button or Press long until the appropriate network provider GSM (4). When the indication (2) first enter a PIN (separate "Instruction Manual phone" or, respectively, "Guidelines for the operation of the system< Linguatronic >).

Press button or Phonebook "scrolls" in alphabetical order forward or backward. Corresponding to the selected surname appears on the display.

Models with a radio, CD or Audio 10 system Comand:

If the button or pressed more than one second, then made rapid "swipe" telephone book.

If you decide not to call, press . The process is interrupted and appears (4).

Press button If display shows the name of the desired party (7). The dialed phone number (8).

If the dialing process is finished, indicated by the name of (9). Indication (9) is maintained throughout the call.

Press button , Phone call ends, the indication (4).

Pressing or displayed the next or previous system.

Calling party - display for audio devices

Calling a party - for the COMAND display


1 - phone is ready for use. Indicated by the relevant GSM network provider
2 - The number or name of memory recall subscriber
3 - Number of memory recall subscriber - began the process of dialing
4 - The process of dialing is completed, stored and displayed in the phone book the name of the caller or the called number, if the name of the subscriber is not stored. Indication is maintained throughout the call,
5 - Signal strength - right of the display on models with the audio device:
the higher the number, the stronger the received signal is a GSM network
The strength of the signal - the left on display for models with system COMAND:
more bands indicated, the stronger the received signal to the GSM network
6 - Number of memory system COMAND: remember the last 10 dialed numbers.
L0, the last number dialed,
L1-L9, the previous dialed numbers
Number memory audio devices:
remembers the last dialed numbers 9,
LO, the last number dialed,
L1-L9, the previous dialed numbers
7 - Display of call duration

You must include phone and audio device or system COMAND.

Button or Press long until the appropriate network provider GSM (1).

Press button - Activates the memory recall subscriber, and indicated the last dialed number.

Press button or - Memory recall subscriber "scrolls" forward or backward. Corresponding to the selected number appears on the display.

If you decide not to call, press . The process is interrupted and appears (1).

Press button If the display (2) is displayed to the number or name of the desired party.

The dialed phone number (3).

If the dialing process is finished, indicated by the name of (4), if it is stored in the phone book; otherwise the display is stored phone number. Indication is maintained throughout the call.

Press button , Phone conversation ends, appears (1).

Pressing or displayed the next or previous system.

Incoming call

1 - you call
2 - Signal strength - right of the display on models with the audio device:
the higher the number, the stronger the received signal is a GSM network
The strength of the signal - the left on display for models with system COMAND:
more bands indicated, the stronger the received signal GSM network.

Phone reported to be enabled.

Press button and accept the challenge.

Press button - The conversation ends, appears with the appropriate telephone network.

If you do not want to accept the incoming call, press .

Adjusting the volume

Press button

increase the volume.

decrease the volume.

Always adjust the volume can only be activated or selected system.

These are the audio system, telephone, radio service to inform about the situation on the roads, the navigation system voice output and speech output voice control system .

On models with COMAND produced volume adjustment is memorized for each system separately.

Coolant temperature

Turn the key in the ignition switch in position 1 and 2;

If you do not indicate the meter run from the date of discharge and the total mileage counter, button or multifunction steering wheel, press until until display (see. above).

Button or Press long until the coolant temperature display.

With appropriate filling antifreeze corrosion inhibitor boiling point of the coolant in the cooling system pressure is reached at about 130 ?� C.

At high ambient temperatures and when moving in the mountains it is allowed to warm coolant to the end of the scale.

Excessive coolant temperature is displayed automatically (see. "The system of warning and alarm malfunctions" Section Warning signal and warning lights, as well as reports on the information display for the fault).





« previos page
Dashboard
next page »
Switches

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.