REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Sunny
		Instructions
		Maintenance
		Engines
		Cooling
		Heating and ventilation system
		Fuel and exhaust system
		The system of the engine is started
			Technical data
			A battery
			Generator
			Engine Starting System
			The gauge of emergency pressure of oil
			Starter
			Ignition system
				Technical data
				Ignition System Check
				Ignition coil
				Distributor
				The integrated module
				Transistor switch module
				Ignition timing
		Coupling
		Transmissions
		Axles
		Brakes
		Suspension and steering
		Body
		Electrical

Distributor

Withdrawal

PERFORMANCE ORDER

1. Disconnect the battery from weight.
	2. Remove the latch, unscrew the screws.
	3. Remove the cover.
4. Remove the gasket.
	5. Disconnect.
6. Disconnect hoses from the vacuum regulator.
7. Mark the position of the distributor relative to the cylinder head.
	8. Remove the two screws and remove the distributor.

Setting

PERFORMANCE ORDER

1. Replace the O-ring shank, check the condition of the lid.
	2. Insert the valve by aligning the key with the slot on the shank in the socket on the cylinder head (arrow Set seal).
	3. Align the labeling (arrow) and slightly tighten the screws.
	4. Install the cover gasket.
	5. Tighten the screws of the cover.
6. Connect the wires and hoses.
7. Check the ignition and adjust if necessary, tighten the bolts of the distributor.

« previos page
Ignition coil