Front seat |
1. Disconnect the battery from weight. |
2. Slide the seat forward to the refusal by a regulator. |
3. Remove the cover from the outer seat rail. |
4. Remove the screw and remove the cover plate on the inside of the guide. |
5. Remove the rear seat bolts. |
6. Slide the seat to the full back and unscrew the front bolts. |
7. Tilt the seat back and disconnect the connector under the seat. |
8. Remove the seat. |
Rear Seat Cushion |
1. Fold the back, remove the bolts and nuts of the hinge to the floor and remove the seat cushion with hinges. |
2. Place the pillow in the reverse order. |
Rear seat armrest |
1. Fold the pillow forward and back. |
2. Remove the screws on the bottom of the roller, unhook and remove the armrest. |
3. Install the armrest in the reverse order. |