printable version
Replacement wheels
To replace the wheel is the same for all vehicles. Preparation PERFORMANCE ORDER | 1. When puncture immediately stop the vehicle, taking into account traffic conditions. | 2. Place the vehicle on a flat, firm surface well away from traffic lanes. | 3. If necessary, turn the emergency stop signal. | 4. If there is a warning triangle, then set it to alert other drivers. | 5. Set the parking brake and engage first or reverse gear (position Park on cars with automatic transmission). | 6. Block the wheel diagonally opposite to the replaced. | 7. In order to avoid dipping into the soft soil jack substitute under a board. |
|
To replace the wheel PERFORMANCE ORDER | | 1. Remove the jack. Jack strengthened the right side of the trunk, under the hatches. | | 2. Spare tire and tools are in a niche inside the luggage compartment, under the escutcheon. Remove the bracket, remove the spare tire, pry and remove the wheel trim. | | 3. Loosen the nuts replaceable wheels. | | 4. Set the jack under the threshold section reinforced body, rotate the jack handle clockwise until the wheel is raised off the ground would be. As holders of the handle and mount the wheel to remove the decorative cap. | | 5. Loosen the nuts and remove the wheel. | | 6. Install the spare tire, tighten and tighten the nuts. Check that nuts after lowering the vehicle. | | 7. Install the wheel trim so that the valve wheel was cast opposite his picture on the cover. |
|
After replacing the wheel PERFORMANCE ORDER | 1. Remove the wheel from under the pads. | 2. Place the rack in the jack and tools in the correct placement. | 3. Check the tire pressure of the wheel mounted. If the pressure is low or you do not have a pressure gauge, is moving at a slow speed, go to the nearest garage and inflate the tire to normal pressure. | 4. immediately hand over the damaged wheel (or bus) to repair. |
|
|