1. To select monaural or stereo, click on the button LM / U. The display will show the characters L.MW or UKW. |
2. Tune to the desired station using one of the following methods. The display shows the tuned frequency. |
Setting in Program mode |
3. Press the button to select the station that was previously stored. The receiver will automatically tune to that station, and the display shows the number of buttons (see. Subsection 1.4.3). |
Mode of continuous search |
4. In this mode, searching for a station. After receiving station setting is automatically terminated. Press simultaneously on both parties of button TUNE and wait a continuous sound. The receiver will start to automatically search for the nearest station with a higher or lower frequency broadcast. After confident reception adjustment stops. At the subsequent press the button search will proceed before confident reception of the following station. |
5. If because of too weak signal can not be adjusted after a single scan the entire frequency range, the search will continue, but if you are sensitive, and the display shows the symbol DX. |
Manual adjustment |
6. Press simultaneously on both parties of button TUNE for a time not exceeding 0.5 seconds. Each time you press the button, the jump to the frequency at which the announcement is possible. |