add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Nissan Sunny
Home
 
Nissan
Sunny
Instructions
Maintenance
Engines
Cooling
Heating and ventilation system
Fuel and exhaust system
Carbureted engines
Engines with fuel injection system
Technical data
Air filter
The accelerator cable
Throttle pedal
Fuel
Fuel Injection System
Decompression of the fuel system
Fuel pump
Fuel Level Sensor
Fuel tank
Fuel Injection System
Throttle Body
Units of the fuel injection system
The fuel distributor and nozzles
Pressure regulator
Throttle Sensor
The bypass damper
Velocimeter
Valve correction idle when the load on the engine
Thermostat increased idle speed
Crank angle sensor and the transistor module
Coolant temperature
Processing Unit
Switch neutral PPC
Starter switch and signal reversing
The fuel pump relay and control unit
Override switch idling at work power steering
Override switch idling when the air conditioner
Vehicle Speed Sensor
Suction collector
An exhaust manifold
Exhaust system
The power supply / exhaust
Emission of exhaust gases
The system of the engine is started
Coupling
Transmissions
Axles
Brakes
Suspension and steering
Body
Electrical
 


Hit Counter by Digits


print page printable version

Thermostat increased idle speed



The thermostat is fastened to the left side of the valve body.

Refitting

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the air filter.
3. Remove the nut and remove clamping flange cam spring pad and arm, drawing attention to the location of parts.
4. Dismantle and remove the valve, remove the O-ring.
5. Installation is performed in reverse order.
6. Replace the O-ring.




« previos page
Valve correction idle when the load on the engine
next page »
Crank angle sensor and the transistor module

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.