printable version
Lights - regulation
1. Lights adjusting screw (see photo). You can only approximately Independently adjust beam headlamps, fine adjustment is carried out in the service station. 2. Place the vehicle on a flat surface in front of the screen (wall) at about 9 m. 3. Measure the distance from the center of the headlights to the floor and draw a line on the screen. 4. Measure the distance from the axis of symmetry of the vehicle to the center of the headlight and check the screen in two vertical lines, thereby obtaining projection headlights centers (two cross). 5. Remove the frame range. To adjust, first tighten the adjustment screws, and letting go, set a beam in the crosshairs on the screen. 6. Turn on the dipped or main beam headlights and turn the adjustment screw on the horizontal beam set on the vertical line. -Then Turning the adjustment screws on the vertical crosshair to set the beams. 7. Shake the car to make sure that both the beam back to its original position.
|