 printable version
Removing and installing front turn signal lamp
NOTE The figures show the removal and installation of the left indicator lamp. Removing the right indicator lamp made in mirror image. |
Withdrawal Turn the ignition and all electrical consumers and translate the key to position 0 (pre-emphasis).
NOTE Put the ignition key on the remote control during removal and installation into the vehicle in order to avoid blocking doors and self-activation of the ?�Coming Home / Leaving Home (home Arrival / Departure from the house)." |
1 Remove the fixing bolt and unlock the lock of the grating 2 bumper cover (Fig. 7.78). Remove the mounting bolt on the underside of the indicator lamp.
Remove the turn signal lamp 1, taking into account the length of the wiring from the bumper cover (Fig. 7.79).
Unlock and disconnect the connector 1 and remove the turn signal lamp 2 with zaklipsovannoy protective overlay (Fig. 7.80).
Unlock with a suitable screwdriver and remove the clamps zaklipsovannuyu protective cover 2 1 indicator lamp (Fig. 7.81).
Setting Install in reverse order, with the following should be considered.
NOTE When installing the protective lining to monitor the accuracy of the landing of catches. |
| 
