 printable version
Removing and installing lighting in the door mirrors to facilitate landing
Highlighting in the side mirror to facilitate the landing of the driver or the lights in the door mirrors to facilitate the landing of the passenger side is installed in the housing left or right side mirror.
NOTE For removal / installation of lighting to take the side mirror is optional. Removing and installing the lamp turn signal right and left side mirrors to perform the same, so the description is given only for one side. |
Withdrawal Turn the ignition and all electrical consumers and translate the key to position 0 (pre-emphasis).
NOTE Put the ignition key on the remote control during removal and installation into the vehicle in order to avoid blocking doors and self-activation of the ?�Coming Home / Leaving Home (home Arrival / Departure from the house)." |
Fold the door mirror 1 in the forward direction of the arrow (Fig. 7.82).
Unlock and remove the backlight from the side mirror in the direction of the arrow, given the length of the connecting cables (Fig. 7.84).
| Fig. 7.85. Removing the cartridge from the housing lighting
|
Remove the cartridge 2 in the arrow direction of illumination body 1 (Fig. 7.85).
Replacing the lamp
Remove the bulb 1 in direction of the cartridge 2 (Fig. 7.86). Socle Lamp 12 V, 6 W
Setting Install in reverse order, with the following should be considered.
NOTE After installation, to check the operation of the side mirrors. |
| 
