REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Polo (from 1994 to 2001, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Polo
		General Information
		Engine
		Greasing system
		Cooling
		Fuel-injection systems
		Ignition system
		Coupling
		Manual transmission
		The drive wheels
		A steering without the amplifier
		A steering with the hydraulic booster
		Front suspension
			Removal and installation of the shock absorber
			Disassembly of the shock absorber
			Repair of the shock absorber
			Assembling the shock absorber
			Removal and installation of the individual parts suspension
			The front subframe
		Rear suspension
		Brakes
		Electrical
		Heating and ventilation system
		Automatic Transmission
		Applications

printable version

The front subframe

Fig. 277. The front subframe with a stabilizer rod: 1 - nut cap; 2, 4 - rubber bearings Suspension; 3 - a bolt; 5 - directing the rubber bearings; 6 - hex bolt; 7 - washer; 8 - rubber booster cushion; 9 - draft of the stabilizer; 10 - bolt 25 Nm; 11 - clamping piece; 12 - the console suspension; 13 - nut 50 Nm; 14 - the sub-frame; 15 - a bolt, 50 Nm + to tighten on 90 ?�

The front sub-frame must be removed, for example by removing the steering. Relevant work is described in Sec. 10 and 11. Features of fastening shown in Fig. 277. 15 Bolts must be tightened to 50 Nm and then tighten on 90 ?�.

To replace worn out rubber bearings 4 equalizer beam suspension for suspension should completely remove the subframe.

« previos page
Removing and installing stabilizer bar

next page »
Rear suspension