 printable version
Wire throttle
Adjusting the throttle cable (4-cylinder gasoline engine) 1. Throttle body
2. Stopper
3. A rope throttle
4. A rubber sleeve
| 5. The gas pedal
6. The sliding bearing
7. Stopper
8. Support the gas pedal |
A warning  A rope is very susceptible to fractures, so when you install requires very careful handling. Even a slight change of heart can lead to breakage during use. Nadlomanny cable is not installed.
Adjustment
| PERFORMANCE ORDER | | 1. Squeeze the pedal to the full throttle position and hold it in this position. You can use the help of others. | | 2. Check to see if the throttle lever to full throttle position for the throttle. |  | 3. Otherwise out retaining plate (1) to pull the cable to lock the throttle lever, wherein the throttle valve is in the full throttle position. In this position, insert the retainer in place. With proper adjustment between the throttle lever and the focus should be a small gap, no more than 1 mm (locking screw (3), lock washer (2)). |
|
Withdrawal
| PERFORMANCE ORDER | | 1. Remove the cable from the lever, the stop and the throttle. | | 2 stops to break off from the passenger compartment. | | 3. Remove the damaged cable to the side of the engine compartment |
|
|
