add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volvo S40 / V40 (from 1996 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volvo S40 / V40
Home
 
Volvo
S40 / V40
General Information
Operation and maintenance of car
Design and specifications Engine
Engine repair
Transmission
Brakes
Front suspension and steering
Rear suspension
Overview
Maintenance and repair
Check and adjust wheel alignment
Replacing the upper link
Replacing the traction control convergence
Removal of the lower arm
Replacing the rubber bushings of the lower arm
Installation of the lower arm
Replacing the front rubber bushings of the trailing arm
Replacing the longitudinal arm
Replacing the spring and shock absorber of the rear wheel
Replace anti-roll bar
Engine Management System Fenix 5.1
Electric. Wiring and components
Body
Diagrams
 


Hit Counter by Digits


print page printable version

Replacing the rubber bushings of the lower arm



Replace the sleeve should be done in this order:

The use of special tools to drive out of the lower arm bushings
Fig. 8.10. The use of special tools to drive out of the lower arm bushings


- Insert the special tool 999 5631 (Fig. 8.10) in the lower arm of the rubber grommet;
- Install special tool 999 5629 by rubber grommet;
- With a special tool 999 5630 press out grommet;
- Clean the lower arm;

The use of a special tool for pressing sleeve in the lower arm
Fig. 8.11. The use of a special tool for pressing sleeve in the lower arm


- Insert the special tool 999 5631 (Fig. 8.11) in the lower arm;
- Install special tool 999 5629 by rubber grommet;
- Place the rubber sleeve on the lower arm;
- With a special tool 999 5630 press in the rubber grommet in the lower arm.




« previos page
Removal of the lower arm
next page »
Installation of the lower arm

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.