REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
			Manual Transmission
			Automatic transmission
				Technical data
				The control lamp fault (MIL)
				Diagnostic trouble codes
				Read fault codes
				Check the transmission fluid pressure
				Testing of teamwork of an automatic transmission and the engine for the motionless car (stall test)
				Check the fluid level in automatic transmission
				Check the operation of the selector lever
				Adjustment of the switch indicate the position of the selector lever
				Adjusting the servo compulsory inclusion downshift
				Adjust the line pressure
				Replacement of an oil sealing ring of a power shaft
				Replacement of a cable drive speedometer
				Removing and installing transmission
				Repair Transmission
				Lever
				Control Cable
				Repair of the selector lever
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

printable version

Repair of the selector lever

Elements of the selector lever

1 - lock solenoid locks;
2 - the switch of the selector lever position N;
3 - spring pin;
4 - spring pin;
5 - steel ball;
6 - Ball Bearing;
7 - a spring;

8 - pin;
9 - the selector lever;
10 - adjusting the cam lever;
11 - the gear lever rod;
12 - Spring selector lever;
13 - the plug;
14 - an arm.

Check

PERFORMANCE ORDER

1. Check the installation position retainer for wear.

2. Check the spring for damage and loss of elasticity.

3. Check the pin at the base of the lever for wear.

Assembly

PERFORMANCE ORDER

	1. Grease the sliding portion of the sleeve. Lubrication: SAE J310, NLGI ?��2
	2. Apply grease to the locations shown in the figure. Lubrication: SAE J310, NLGI ?��2

« previos page
Control Cable

next page »
Axes and power shafts