 printable version
Technical data
Elements of brake system
| The main brake cylinder | Type | Tandem | | Bore mm | 22.22 | | Vacuum brake booster | Type | Vacuum | | Effective diameter, mm | 228.6 | | Ratio | 4.0: 1 | | Front brakes | Type | disk ventilated | | Brake Disc Thickness, mm | 19 | | Brake disc diameter, mm | 241 | | The thickness of the brake pads, mm | 9 | | Bore mm | 54 | | Rear drum brakes | The inner diameter of the brake drum, mm | 180 | | The thickness of the brake pads, mm | 4.8 | | Bore mm | 19,05 |
Adjusting data
| Installation height of the brake pedal, mm | 163.5 | | Brake pedal travel, mm | 135 | | Clearance brake light switch, mm | 0.5-1.0 | | The free pedal travel, mm | 3-8 | | The distance from the brake pedal to the floor, mm | 50 | | The gap between the brake servo pushrod and the brake master cylinder, mm | 0 | | Progress parking brake lever while tightening its force 196 N | 6-7 clicks | | Minimum thickness pads front brake pads, mm | 20 | | Minimum thickness of a brake disk, mm | 17 | | Palpation of a brake disk, mm | 0.05 | | Minimum thickness pads rear brake pads, mm | 10 | | The maximum diameter of the bore of the brake drum, mm | 182 | | The maximum allowable gap in the working piston brake cylinder, mm | 0.15 |
Anti-lock brakes
Element | Name | Value | | The control unit ECU | Supply voltage, | 10-16 | | Temperature range, ?° C | -40 ... 110 | | ABS warning lamp | Supply voltage, | 12 | | Current consumption, mA | 80 | | Wheel speed sensor | Resistance, Ohm | 1275-1495 | | Output frequency in Hz | 15-2000 | | The air gap of 0.2-1.2 mm | 0.2-1.2 | | Hydraulic block HECU | Weight, kg | 2.5 | | Engine | 12 B 30 A | | Engine power, W | 180 | | Performance in cm 3 / s | 5.5 |
Tightening torques, N ??? m
| The front wheel speed sensor | 8-9,5 | | Rear wheel speed sensor | 15,5-16,5 | | Bolts control unit ECU and Hydraulic block HECU | 8-10 | | Bracket bolts of the control unit ECU and Hydraulic block HECU | 9-10 | | Six brake pipes to the hydraulic unit | 16 | | Nuts of fastening of the main brake booster to the brake servo 8-12 | 8-12 | | Nuts of fastening of the vacuum amplifier of brakes | 8-12 | | Fitting the vacuum hose of the vacuum brake booster to the intake manifold | 8-12 | | Bleeder valve | 7-9 | | Connecting the brake pipe nuts | 13-17 | | Caliper guide pin | 35-45 | | Screw the guide sleeve | 22-32 | | Caliper mounting bolts to the steering knuckle | 65-75 | | Banjo bolt brake hose to the caliper | 25-30 |
|
