add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
The fuel system of petrol engines
Technical data
Troubleshooting
Check idle speed
Checking the fuel pump
Replacement of the fuel filter
Replacing the overflow limiter (two-way valve)
Replacing fuel level sensor
Verification system of injection MFI
The control lamp fault (MIL)
Diagnostic trouble codes
Sensors
Fuel injectors
The modulator control the speed of the crankshaft of the engine idling (ISC)
Vehicle speed sensor (VSS)
The knock sensor (KS)
Ignition switch (ST) and the band switch (TR) in vehicles with automatic transmission
Ignition switch (ST) on vehicles with manual transmission
The engine control unit
Switch and switch the air conditioning system
The solenoid valve of clearing of the canister fuel vapor recovery (EVAP)
Main relay MFI
Ignition coil
Fuel pump
Acceleration sensor APS
Oil valve (OCV)
A fuel highway and injectors
Throttle knot
Fuel tank
The pedal and the accelerator cable
The fuel system of diesel engines
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

The pedal and the accelerator cable



Withdrawal

PERFORMANCE ORDER

  1. Remove the plug and the tip of the inside of the rope from the lever of the accelerator pedal.
  1. Disconnect the connector from the switch of the accelerator pedal, turn out bolts and remove an arm of the accelerator pedal.

Check

PERFORMANCE ORDER

  1. Check the accelerator cable and cable housing damage.
  2. Check for smooth movement of the accelerator cable in the shell.
  3. Check for the absence of an accelerator pedal of the bend.
  4. Check the condition of the return spring.
  5. Check the condition of the tip of the accelerator cable.
  6. Check operation of the accelerator pedal switch.

Setting

PERFORMANCE ORDER

  1. Grease the pivot point of the accelerator pedal.
  1. To prevent vapor and exhaust gases in the interior of the vehicle, apply sealant to the threaded bolts of the accelerator pedal arm. Torque: 8-12 N ??? m
  1. Insert the tip of a cable of an accelerator in the grip end of the lever of the accelerator pedal.
  1. Apply multipurpose grease around the tip of the accelerator cable.




« previos page
Fuel tank		 next page »
The fuel system of diesel engines

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.