NOTE Belt tension is measured in the middle of the branch of a belt between said pulleys. When installing a new belt, adjust the tension so that it corresponds to the average value of the range of values in the column "for a new belt" Table 2.2. After installing the belt, run the engine for 5 minutes or longer, and then check that the belt tension to the nominal value of the column "checking" Table 2.2. When adjusting the former to use a belt or a new belt, who worked on the engine for more than 5 minutes, use the nominal values given in the column "for the former to use belt" Table 2.2. For the periodic inspection belt use nominal values given in the column "checking" Table 2.2. |