printable version
Engine starting
Combined ignition If the vehicle is equipped with a manual gearbox, move the gearshift lever into neutral and fully depress the clutch pedal. If the car is equipped with an automatic gearbox, move the selector lever to position "P" ("parking"). To start the engine, insert the key into the ignition and turn it to ?�START?� (?�starter"). Release the ignition key immediately after the engine starts. Do not hold the ignition key in position ?�START?� (?�starter") for more than 15 seconds.
NOTE For security purposes, the motor vehicle can not be started when the selector of an automatic transmission is not in position "P" ("parking") or ?�N?� (?�Neutral transmission") (only for vehicles with automatic transmission). |
The provisions of the ignition ?�LOCK?�: ?�Blocking?�. "ACC", "Accessories." ?�ON?�: ?�On?�.
?�START?�: ?�Starter". ?�START?�. In this position, the starter motor is operating. He turns the crankshaft of the engine as long as the ignition is turned off. ?�ON?�. In this position, the engine is running, and may include all electrical systems. Do not leave the ignition key in position ?�ON?�, when the engine is not running. This will drain the battery and the output of the ignition system failure. "ACC". When the ignition key is in this position, it is possible to include some electrical systems (Radio with cassette, lighter, etc.). ?�LOCK?�. The ignition key can be inserted or removed only in this position.
NOTE To unlock the steering wheel, insert the key into the ignition and turning the steering wheel lightly at the same time, turn the ignition key. |
To remove the key from the ignition switch: - Turn the ignition key to the "ACC". - Press and turn the ignition key counter-clockwise from the "ACC" position ?�LOCK?�.
| Fig. 1.132. Removing the key from the ignition lock
|
Starting the engine (for cars with fuel injection system)
1. The driver and all passengers in the vehicle should fasten your seat belts appropriate. 2. Check that the parking brake is on. 3. Press the brake pedal. Vehicles with manual forehand. Fully depress the clutch pedal and move the shift lever to the neutral position. Hold the clutch pedal fully depressed while the starter. Cars with automatic transmission. Move the switch lever range to "P" ("parking"). If you want to start the engine while driving, move the lever range switch ?�N?� (?�Neutral?�).
NOTE Cars with automatic transmission. The starter is locked when the switch lever range is not in the "P" ("parking") or ?�N?� (?�Neutral?�). |
5. Turn the ignition switch to ?�START?� (?�starter") and hold the handle in this position before starting the engine (but not longer than 10 seconds). 6. After starting, allow the engine to idle about 10 seconds.
NOTE When the key is turned in the ignition with difficulty, rock steering wheel from side to side to relieve the load on the locking member. |
|