printable version
Power connectors
To disconnect the connector, press the latch. When unplugging the connector, do not pull the wires and hold the connector housing.
Check
If the process of checking the conductivity or voltage via tester probe introduced into the connector, wherein the connector is releasably and deterioration of the contact. Therefore, the probe must be connected by wiring.
Replacement
To disassemble the connector, use a suitable tool. When installing the press until it clicks.
Insert puller or a metal object on the part of the conclusions of the connector and pull the contact back while pressing the tab.
| Connector type nesting number 1 |
|