add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Rio
Home
 
Kia
Rio
Instructions
Engines A3E, A5D
Greasing system
Cooling
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Wheels and tires
Steering
Brakes
Body
The air conditioning system
Technical data
Circuit air conditioning system
Remarks at replacement of elements of the air conditioning system
Merging an air-conditioning system
Safety measures
Verification performance
Diagnosis of air-conditioning system using a pressure gauge
Check the air conditioning compressor clutch clearance
Check the air conditioning compressor clutch
Oil for air conditioning compressor
Checking and topping up the oil in the air conditioning compressor
The air filter of the evaporator
Dual pressure sensor
Air conditioning compressor
Check capacitor
Check condenser fan
Check receiver dryers
Checking the thermostatic sensor (thermistor)
Check the fan motor
Check of the block of resistors of the fan motor
Switch the air supply to the vehicle interior
The control panel air-conditioning system
Electrical equipment
 


Hit Counter by Digits


print page printable version

Circuit air conditioning system



Location of the air conditioning system on the vehicle

1 - suction tube;
2 - condenser fan;
3 - a tube;
4 - the gauge of double pressure;
5 - Receiver / dryer;
6 - a cold pipe;
7 - evaporator;
8 - a cover of the evaporator.

Elements of system of air conditioning

1 - suction tube;
2 - discharge hose;
3 - expansion of the hose;
4 - capacitor;
5 - air conditioning compressor;
6 - guide pulley;
7 - C compressor drive belt;
8 - an arm of the air conditioning compressor;
A - nuts 18-23 N ??? m;
In - a bolt, 16-32 N ??? m;
C - bolt, 24-36 N ??? m;
D - nut 32-48 N ??? m;
E - nut 24-32 N ??? m.

Instructions for use of the refrigerant

Liquid refrigerant R-134a with a high content of volatile substances. Hit it on the skin can result in frostbite, so when working with refrigerant is necessary to wear protective gloves.

As a standard measure of protection when working with the refrigerant is necessary to use eye protection. After contact with the refrigerant in the clothing or protective gear, immediately wash the affected area with plenty of water.

Liquid refrigerant R-134a is stored in containers (cans). Keep refrigerant cylinder at a temperature of not more than 52 ?� C.

To check the tightness of air-conditioning systems use electronic sensor. Keep in mind that the R-134a refrigerant after contact with flame decomposes to release very toxic gas.

Only use the recommended oil for the lubrication of components of air conditioning, as otherwise the system may malfunction.

Grease PAG absorbs moisture from the air, so it is necessary to observe the following precautions:

- Separation of components in the air-conditioning system, immediately close the connection corresponding caps to eliminate the ingress of moisture into the system;
- When installing new components of the air conditioning system to remove their protective cover just before installation;
- Connect pipes and hoses, air conditioning system as quickly as possible to reduce the ingress of moisture into the system;
- Use a lubricant for air conditioning system only sealed container.

If an accidental discharge of the air conditioning system before servicing the system, ventilate the work area.





« previos page
Technical data
next page »
Remarks at replacement of elements of the air conditioning system

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.