1. Remove the adjusting nuts on the release lever so that the cable can be removed from the squeezing lever. |
2. Remove the clip that secures the cable to the bracket shell clutch pedal. |
3. Pull the cable up and disconnect it from the clutch pedal hook. |
4. Loosen the nuts and remove the spring and flat washers from the hinge pin. |
5. Remove the clutch pedal with the pivot bolt and return spring. |
| 6. If necessary, remove the rubber cover from the clutch pedal and stop. |
A warning Apply a thin layer of lithium grease (NGLI No. 2) on the sleeve and the pivot point of the pedal.
|