1. Install the trailing arm rear suspension bracket and a support hub and fix two bolts.
Torque: 43-61 N ??? m |
2. Set the parking brake cable bracket on the trailing arm rear suspension and fix two bolts.
Torque: 19-26 N ??? m |
3. Set the cross rod to the support hub and tighten the pivot bolt, two washers and spring washer, then tighten the lock nut.
Torque: 93-117 N ??? m |
4. Install the front transverse rod and secure it with a bolt and a lock washer to the cross beam.
Torque: 93-117 N ??? m |
5. Install the rear transverse rod and secure it with a bolt and a lock washer to the cross beam.
Torque: 93-117 N ??? m |
6. Install the wheel. |
7. After the installation, check the angles of the rear wheels. |