REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
			Technical data
			Checking the compressor relay
			Check the air conditioner switch
			Check thermal contact conditioner
			Fan / evaporator
			Check the fan motor
			Check of the block of resistors of the fan motor
			Air conditioning compressor
			Check the fan switch
			C compressor drive belt
			Condenser
			Condenser Fan
			Check the condenser fan relay
			Block heater
			The control unit of heating and ventilation
		Electrical equipment

printable version

Block heater

Withdrawal

PERFORMANCE ORDER

1. Drain the coolant from the cooling system.
2. Remove the instrument panel.
	3. Loosen the clamp and disconnect the control cable.
	4. Disconnect the heater hoses from the block heater.
	5. Remove the block heater

Setting

PERFORMANCE ORDER

Installation of the heater is carried out in reverse order of removal.

A warning

Before installing the sealing rings, oil them;

Do not grease connecting nuts of unions of the air conditioning compressor;

When installing a new fan or the evaporator fill in 50 cm ³ of fresh oil to the compressor via the pressure line of the compressor.

« previos page
Check the condenser fan relay

next page »
The control unit of heating and ventilation