REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
			Technical data
			Checking the compressor relay
			Check the air conditioner switch
			Check thermal contact conditioner
			Fan / evaporator
			Check the fan motor
			Check of the block of resistors of the fan motor
			Air conditioning compressor
			Check the fan switch
			C compressor drive belt
			Condenser
			Condenser Fan
			Check the condenser fan relay
			Block heater
			The control unit of heating and ventilation
		Electrical equipment

The control unit of heating and ventilation

Withdrawal

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
2. Remove the top decorative overlay of the panel of devices.
3. Remove the four screws.
4. Pull the control unit of heating and ventilation of the slot.
5. Disconnect the electrical connector from the back of the block of management of heating and ventilation.
6. Remove the two screws and remove the glove box.
7. Release clips and disconnect a cable temperature control and control cable from the unit heater.
	8. Remove the block of management of heating and ventilation.

Setting

PERFORMANCE ORDER

1. Installing the control of heating and ventilation is carried out in reverse order of removal.

2. Connect the cable to the negative terminal of the battery.

« previos page
Block heater