add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Sephia / Shuma
Home
 
Kia
Sephia / Shuma
Maintenance
Engine
Greasing system
Cooling
The power supply system and release
Adjusting accelerator cable
Check the air filter element
The elements of the exhaust system
The filter element air filter
Check ignition timing and idle speed
Electronic engine control module (ECM)
Check crankcase ventilation (PCV)
Checking system EVAP
Check valve system EVAP
Checking fuel vapor separator
Check bilateral control valve
Check of the canister with the activated coal
Check valve fuel vapor
Sensor Flow air (TED)
Check vacuum
Sensor Flow air (TED)
Coolant temperature
Throttle Position Sensor
Heated Oxygen Sensor
:20. Checking the front and rear heated oxygen sensors
The main relay
Fuel system
Ignition system
Coupling
Manual transmission
Automatic Transmission
Axes and power shafts
Steering
Wheels and tires
Brakes
Suspension
Body
The air conditioning system
Electrical equipment
 


Hit Counter by Digits


print page printable version

Check valve system EVAP



PERFORMANCE ORDER
1. Disconnect the vacuum hoses from the EVAP valve (EVAR) and blow it.
2. Make sure that the air does not pass through the valve.
3. Disconnect from the valve connector and additional wires to connect the valve to the battery, as shown.
4. Compressed air purge valve.
5. If air does not pass through the valve, replace it.
6. Connect the connector to the valve.
7. Connect to the valve vacuum hoses.




« previos page
Checking system EVAP
next page »
Checking fuel vapor separator

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.