REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
			Adjusting accelerator cable
			Check the air filter element
			The elements of the exhaust system
			The filter element air filter
			Check ignition timing and idle speed
			Electronic engine control module (ECM)
			Check crankcase ventilation (PCV)
			Checking system EVAP
			Check valve system EVAP
			Checking fuel vapor separator
			Check bilateral control valve
			Check of the canister with the activated coal
			Check valve fuel vapor
			Sensor Flow air (TED)
			Check vacuum
			Sensor Flow air (TED)
			Coolant temperature
			Throttle Position Sensor
			Heated Oxygen Sensor
			:20. Checking the front and rear heated oxygen sensors
			The main relay
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

printable version

Coolant temperature

Withdrawal

A warning

The coolant temperature sensor is located next to the thermostat.

PERFORMANCE ORDER

1. Unplug the connector from the coolant temperature sensor.
	2. Remove the engine coolant temperature sensor.

Check

PERFORMANCE ORDER

1. Measure the sensor resistance at different temperatures.
The sensor resistance at 20 ?� C - 2,45 ?� 0,24 kW.
The sensor resistance at 80 ?� C - 0,322 ?� 0,032 ohms.

2. If the sensor resistance differs from demanded values, replace it.

Setting

PERFORMANCE ORDER

1. Install the coolant temperature sensor with a new seal.

Torque: 25-29N ??? m

2. Connect the sensor connector.

3. Start up the engine and check for leaks from the cooling system.

« previos page
Sensor Flow air (TED)

next page »
Throttle Position Sensor