add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Sephia / Shuma
Home
 
Kia
Sephia / Shuma
Maintenance
Engine
Greasing system
Cooling
The power supply system and release
Adjusting accelerator cable
Check the air filter element
The elements of the exhaust system
The filter element air filter
Check ignition timing and idle speed
Electronic engine control module (ECM)
Check crankcase ventilation (PCV)
Checking system EVAP
Check valve system EVAP
Checking fuel vapor separator
Check bilateral control valve
Check of the canister with the activated coal
Check valve fuel vapor
Sensor Flow air (TED)
Check vacuum
Sensor Flow air (TED)
Coolant temperature
Throttle Position Sensor
Heated Oxygen Sensor
:20. Checking the front and rear heated oxygen sensors
The main relay
Fuel system
Ignition system
Coupling
Manual transmission
Automatic Transmission
Axes and power shafts
Steering
Wheels and tires
Brakes
Suspension
Body
The air conditioning system
Electrical equipment
 


Hit Counter by Digits


print page printable version

Checking system EVAP



PERFORMANCE ORDER
1. Start the engine and warm it up to normal operating temperature.
2. Disconnect the vacuum hose from the EVAP valve (EVAR) and blow it from the hose.
3. Make sure that there is no vacuum in the canister fuel vapor recovery system controlled solenoid valve.
4. Otherwise, check the canister fuel vapor recovery system.
5. If the valve is working properly, connect the vacuum hose.




« previos page
Check crankcase ventilation (PCV)
next page »
Check valve system EVAP

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.