add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 323 (1985 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 323
Home
 
Mazda
323
Introduction
Gasoline engines
Engine oil
Engine cooling system
Ignition system
The power supply system, the carburettor, fuel injection system
Diesel engine
Exhaust
Coupling
Manual gearbox
Automatic Transmission
Suspension and steering system
Brakes
Wheels and tires, a body, car coloring, care of the car
Electrical system
Heater, illumination system, devices
Controls and operation receptions
Before boarding the vehicle
Running
The keys
Door Locks
One (central) locking device (if available)
Protection against pranks of children (if there is only on the rear doors)
Electric windows (if available)
Rear swivel glass (3-door models)
Seats
Adjusting the height of the steering wheel (if available)
Seat belts (if available)
Door tailgate / boot lid
Fueling
Mirrors
Luggage belts
The boot lid (if available)
Spare wheel
Dashboard
Steering wheel and gearshift
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Seats



The front seats

1 - the lever for seat adjustment
2 - seatback adjustment lever (or castor wheel)
3 * - height adjustment lever
4 * - adjust lever (for the back of the seat upholstery)

5 * - lever lumbar support
* 6 - the lever of the side supports
* 7 - the lever of the seat back
* - If available


For safety reasons, the driver's seat in any case can not be adjusted on the fly.

Longitudinal adjustment

PERFORMANCE ORDER

  1. The front seats can be moved forward or backward if the pull out lever. To lock the seat release lever.

Do not place any objects or under the front seats, as because of this lock can be broken down.

Adjustable seat backs (if available)

Type A

PERFORMANCE ORDER

  1. To adjust the seat back lean slightly forward and pull up the lever to adjust the backrest. Then lean back slightly to adjust the desired angle of the backrest and release the lever.
  1. Check that the correct lever back to its original position, otherwise the backrest can be displaced while driving, and you may lose control of the car.

Type B

PERFORMANCE ORDER

  1. To adjust the seatback lean forward slightly and rotate the wheel to adjust the desired position of the backrest.

Passengers in the rear seat must not lean against the front seats, as the backrest in case of emergency braking may loosen.

Vertical adjustment (special equipment driver's seat)

front part

Type A

PERFORMANCE ORDER

  1. For vertical adjustment of the front part of the seat, pull the lever up and press against the seat.
  2. To set the following, pull up the lever and click on the seat surface.

Type B

PERFORMANCE ORDER

  1. For vertical adjustment of the front part of the seat, pull the lever up and press against the seat.
  2. To set the following, pull up the lever and click on the seat surface.

Rear end

PERFORMANCE ORDER

  1. The back of the seat can be adjusted in height if the shift lever up or down.

Headrests

PERFORMANCE ORDER

  1. Pull up the headrest to set it higher.
  2. Press down the headrest to set it below.
  1. Install the head restraint so that its center was at ear level.

In no case do not make trips without head restraints to reduce the risk of injury to the head or neck.

Adjustable lumbar support (optional extra driver's seat)

Lumbar support is regulated by a lever on the inner side of the backrest. Adjustment has three stages.

Adjust the side supports (special equipment driver's seat)

Side supports are controlled by the wheel on the inner side of the seat back.

Rear Seat 3-door model

(special equipment driver's seat)

PERFORMANCE ORDER

The driver's seat
  1. Pull the lever up to tilt the backrest forward. When tilting back the seat back is fixed automatically.

The lever should not be pressed by passengers in the back seat while driving.


Passenger seat
  1. The back of the passenger seat folds forward, and all the seat automatically moves forward if you pull up the lever or push the pedal. After landing or landing, slide the seat back, so that it is properly fixed.

The pedal should not be pressed by passengers in the back seat while driving.

Heated front seats (if available)

Each front seat has a heating switch which can be switched on only if the ignition key is in position ?�ON (II)?�. The heating system has a thermostat that is activated at a temperature below 12 ?� C and turns off at 32 ?� C.

Separate recline rear seat (if available)

To increase the amount of luggage the rear seat backrest can be folded forward separately.

Type A

(hatchback and sedan)

PERFORMANCE ORDER

  1. Pull the button or belt * and fold the rear seatback.
  2. Lift the rear seatback and click it back to it straight.

(wagon)

PERFORMANCE ORDER

  1. Pull the button and fold the rear seatback.
  2. When folding the backrest is fixed.
  3. Pull the unlocking button, lift the seatback and click it back to it straight.

Type B (wagon only)

PERFORMANCE ORDER

  1. To fold the seatback, pull the lock lever forward.
  2. Raise the seatback and click it back to it straight.

  • With rear seat folded down the luggage should not be placed so that it was above the level of the front seat backrests. Furthermore, baggage must be firmly secured to the sudden braking or an accident, it can not slide forwards and increase the danger.
  • Pull the rear seat back after raising it to ensure that it is firmly fixed.
  • During the movement one should not be in the boot and passengers do not have to sit in the rear seat folded down, as under hard acceleration or braking or an accident can cause serious injury.
  • Children should not play on the folded rear seatback, as they may be accidentally locked in the trunk.

Adjustable rear seat backrest (hatchback and wagon, if available)

Hatchback

PERFORMANCE ORDER

  1. Rear seat backrest can be set in 12 different positions.
  1. Pull the belt or button to set the desired backrest. When the button is released or the seat belt is automatically locked in this position. Flip up the front portion of the rear parcel shelf or to remove it if the backrest is tilted back.

Versatile

PERFORMANCE ORDER

  1. Rear seat backrest can be mounted in 8 different positions.
  1. Pull the button to set the desired backrest. When you release the button, the seat back is automatically locked in this position.

The luggage compartment under the seat (optional extra passenger seat)

For storing small items under the passenger seat there is a box.

The box can be put anything to the motion was not noise.





« previos page
Rear swivel glass (3-door models)
next page »
Adjusting the height of the steering wheel (if available)

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.