 printable version
Removing and installing crankshaft rear oil seal
| Fig. 2.130. Removing the crankshaft rear oil seal 1 - bolts; 2 - gland
|
Unscrew the six bolts securing rear oil seal and remove the gland (Fig. 2.130).
Kremnievoorganichesky Apply sealant to the mating surfaces in the location shown in Figure 2.131. The diameter of the point of application of 0.4-0.6 mm. Apply clean engine oil to the lip of a new oil seal.
| Fig. 2.132. Installation scheme crankshaft rear oil seal: 1 - the crankshaft; 2 - rear oil seal; 3 - a device to install; 4 - cylinder block
|
Install and press-fit the rear oil seal using the device for installation details as shown in Figure 2.132.
| Fig. 2.133. Order of a tightening of bolts securing crankshaft rear oil seal
|
Tighten the rear oil seal in the manner indicated in Figure 2.133, torque 8,0-11,5 Nm.
| 
