printable version
Check and replacement of elements of system of ignition
High voltage wires PERFORMANCE ORDER | 1. Inspect the high voltage wires for signs of sparks from the engine is running. | | 2. Disconnect the spark plug, grasp the wire cover. Inspect the contact wire, clean the contacts from corrosion or replace wires. | 3. Connect the wires to the spark plugs. | 4. Wipe off the high voltage cables along the entire length of wire and inspect for damage or wear. | | 5. Disconnect the wires from the distributor or ignition coil. Check the condition of the contacts. |
|
Distributor Cap and slider PERFORMANCE ORDER | | 1. Turn off fixing screws and remove the ignition distributor. | | 2. Inspect the cover for cracking (1), traces of sparks (2), a broken sections (3) and other damages. | | 3. Inspect the ignition distributor on the inside for signs of sparks (1). Check erased if the terminals (3) is not damaged and coal (2). | | 4. Remove slider and inspect it for cracks (3), corrosion (2) and other damages. Check for loose spring (1). Replace the cap and the slider, if necessary. | 5. Check the contact resistance between the high voltage cables and the cover. |
|
Ignition coil PERFORMANCE ORDER | | Inspect the coil for cracks, damage and traces of sparks. |
|
|