REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
			Introduction
			Specifications
			Thermostat
			Cooling Fans
			Radiator and expansion tank
			Water pump
			Coolant temperature
			Engine oil cooler (6-cylinder models)
			The electrical circuit of the motor blower
			Motor blower
			The control unit heater and the air-conditioned
			Radiator Heater
			Systems of air conditioning and heating
				The electrical circuit of the air conditioner compressor clutch
				Dehumidifier air conditioning system
				The compressor of the air conditioner
				Refrigerator air-conditioning system
				The evaporator air conditioning system
				A broad nozzle of an air conditioning
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

The evaporator air conditioning system

Withdrawal

PERFORMANCE ORDER

1. Lower pressure in system.
	2. Remove refrigerant from the evaporator tubes.
3. Remove the glovebox (Mazda). Disconnect the control cable from the temperature door lever (Probe).
4. Disconnect the wires from the evaporator and blower housing.
	5. Unscrew bolts and braid nuts (arrows) evaporator and blower.
6. Remove the screws, remove the cover of the evaporator and the evaporator itself.

Setting

Installation is spent upside-down removals.