 printable version
Visual check of tightness
Possible leaks are as follows: - The place of separation between the cylinder block of the engine and transmission (flywheel seal / shaft seal transmission);
- Propeller shaft at the checkpoint;
- Screw the oil filler plug;
- Drain plug. When searching for leaks, proceed as follows:
| PERFORMANCE ORDER | | 1. Clean the gearbox housing low-temperature cleaner. |  | 2. Check the oil level. To do this, remove the screw the oil filler plug (1). The oil level should reach the lower edge of the filling hole, if necessary top up with gear oil. | | 3. Tighten the screw the oil filler plug with a torque of 60 Nm max. | | 4. sputtered on alleged leaks lime or powdered talc. | | 5. Carry out a test drive. To the oil was flowing easily, it should go on the highway at a distance of approximately 30 km. | | 6. Then prepodnimite car and inspect the transmission by means of the lamp in order to detect leaks. | | 7. Urgent liquidate leaks. |
|
|
