 printable version
Check preheating device
If the indicator lamp does not flash preheating, although the ignition key switch and devices with anti-theft device, locking the steering is in the warm-up, depending on the outdoor temperature is determined by the duration of the pre-heating of the combustion chamber of a diesel engine, and the engine starts. If the engine runs well, check the bulb glow plug and electric line. If the engine will not start, check for an open circuit armature current preheating device. If the engine runs poorly, check the glow plugs. Check the sensor, if the duration of the heating is too small or too large.
A warning  If the engine is started badly, although the heating control light indicates normal operation of the preheating device, it may be a faulty one of the glow plug cylinder 2-4. In this case also check the spark.
| PERFORMANCE ORDER | | Remove the cover from the relay control heating. For this purpose the inlet side of a drop wire cover and tilt it upwards. Heating control relay located in the engine compartment on the left wing. |
|
|
