| 1. Remove the control relay heating 6-pin plug, turn the ignition key to the "2" and connect the control wire chips 1 and 3 on the plug. | 2. If now the control lamp lights up heating, the heating of the faulty control relay, replace the relay. Otherwise, remove the bulb, check it and replace if necessary. | 3. If the light is working, check the ohmmeter current flow between the black wire on the chip 3 and the bulb, if necessary, check the bulb contact with the body, remove the broken wire. A warning If the lamp is lit for a long time preheating, it indicates a fault in the relay control heating (contact stuck).
|
|