 printable version
Replacing brake fluid
Replace the brake fluid should be carried out every two years of operation. At the workshop the procedure is carried out using a special filling device. If the car has ESP, replace the brake fluid only in the workshop. Otherwise, the replacement can be carried out independently - the procedure is similar to pumping. For operation you need two liters of the new brake fluid specified in the specification of the brand.
1. Drain the brake fluid reservoir clean syringe or a pear.
| Fig. 8.22. Before filling the brake fluid reservoir is always first check the filter is dirty. The liquid fill only when the filter
|
2. Procedure on each bleeder valve similar response when bleeding the brake system. It is only necessary to top up each time enough brake fluid in the reservoir (Fig. 8.22) - 500 cm 3 for each bleeder valve. This volume is needed to ensure that the new liquid is not mixed with the old.
| 
