printable version
Removing door trim
1. Lower the window.
| Fig. 11.27. Removing the lining of the castle
|
2. Remove the bolt and remove the lining of the castle facing downwards (Fig. 11.27).
| Fig. 11.28. The arrows indicate the screws Handle opening the door and armrest
|
| Fig. 11.29. The front door with a trim removal - insulating tape has been removed: 1 - interior doors with locks, lattice dynamics and the opening of a door handle on the inside; 2 - cup handle door opening; 3 - facing the door lock; 4 - side air bag; 5 - pull the drive door opener; 6 - a vacuum hose central locking
|
4. Remove the two screws of the cup. 5. Remove the cap screws under the armrest, then turn the screw with a Phillips head. 6. A suitable subject gently press the door trim 1 on the perimeter. If possible, place the tool closer to the lock. 7. At the top of the rack at the opening of the sealing glass, press the upholstery upwards. 8. Remove the trim. 9. Remove the liner 3 of the lock mechanism and remove the mechanism. 10. If necessary, disconnect the electrical contacts.
PRACTICAL ADVICE If damaged, the door trim If the insulating film of the door trim is damaged, it must be replaced. Otherwise, the interior will get wet and soften. The internal and external sealing bar opening glass doors locked tin brackets |
.
|