 printable version
Removing the front door
1. Lower the window.
| Fig. 11.23. Removing door sill plates with a suitable tool wide
|
2. Remove the protective cover on the threshold of the door (Fig. 11.23). To protect enclose the body tissue.
| Fig. 11.24. After removing the side cover (1) of legroom offers access to a vacuum (2) and electric (3) connectors
|
3. Remove the side trim legroom (Fig. 11.24). To do this, carefully remove the cap screw and unscrew the screw with a Phillips head. 4. Disconnect electrical wiring and vacuum hose. 5. Remove the plug terminator door. Remove the bolt TORX at the front door.
| Fig. 11.25. Hinges and fasteners to the front door of the body: 1 - hinge bolts on the front of the rack; 2 - folding sleeve for wiring; 3 - Plug and seal the door stop; 4 - door seal; 5 - door stopper; 6 - TORX screw to adjust the door
|
6. Remove the two screws 1 (Fig. 11.25) each loop at the front door. Ask the assistant to hold the door, extracted from the rack. 7. Remove the collapsible sleeve from the rack and remove the multi-pin connector. 8. Remove the door.
| 
