 printable version
Replacement of lamps of internal lighting
Front ceiling light 1. Pry the diffuser with a screwdriver.
| Fig. 10.17. After removing the lens can replace the lamp assembly as defined (arrows)
|
2. Remove the lamp assembly as defined in spring contacts (Fig. 10.17). If necessary, carefully retighten contacts.
| Fig. 10.18. When reinstalling the lamp housing (1), first insert from the windshield, and then lift up until it snaps into the spring clips (arrows). Pre-insert the connector (2) and check that the
|
4. To remove the lamp when removing the lens pull back the clips on both sides and remove the lamp. Disconnect the wire from the back side. Rear ceiling light
| Fig. 10.19. Replacing the lamp in the rear ceiling lights
|
1. The lamp gently pry with a screwdriver and remove from the hole in the ceiling (Fig. 10.19). 2. Take the lens. 3. Remove the lamp assembly as defined in spring contacts. If necessary, carefully retighten contacts. 4. Insert a new lamp.
| 
