add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz M-Class (W163, 1997 issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz W163
Home
 
Mercedes-Benz
W163
Introduction
Controls and receptions of safe operation
Current care and maintenance
The active warning system Maturity planned TO (ASSYST)
The routine maintenance schedule
General information about the settings,
Check fluid level, leakage control
Checking the condition of tires and pressure in them, the designation of tires and wheel rims, wheel rotation
Replacing the motor oil and oil filter
Check the brake system
Check the power supply system, replacement of the fuel filter
Check and replacement of hoses of an impellent compartment, localization of leaks
Checking the multirebernyh accessory drive belt
Check the functioning of the cooling system and frost coolant fluid replacement
Checking the exhaust system
Replacement and check of level ATF, AT filter replacement
Visual check of tightness automatic transmission
Checking the suspension components and steering
Checking the status of anther drive shafts
Check the air conditioning system
Grease limiters door locks and cylinders
Visual inspection of safety belt and airbag unit
Verifying the headlights and horn
Check and replace wiper blades
Checking the status of the battery, care it and gymnastics
Replacing the cabin filter
Replacing brake fluid
Check and replacement of spark plugs, check the status of high-voltage wires (petrol models)
Engine
System of cooling, heating and air conditioner
The power supply system and exhaust
Systems of an electric motor
Manual box of a gear change
The transmission automatically processed
Transmission Line
Brakes and auxiliary systems
Suspension and steering
Body
Onboard electric
 


Hit Counter by Digits


print page printable version

The active warning system Maturity planned TO (ASSYST)



Indicator Maturity routine maintenance (MOT)

Maturity indicator scheduled TO inform the optimal timing of maintenance and his testimony does not relate to the level of the motor oil.

If the battery is disconnected, while the parking lot is not included in the count period of the planned offensive WHAT - to save the frequency of procedures of routine maintenance during this period should be taken into account.

Approximately one month before the due date of the next when you turn on the ignition in the digital display odometer speedometer for about 10 seconds to show the value of the remaining mileage (in kilometers), or time (in days) until the next service execution procedures.

Information on the timing of the planned offensive in the conclusions odometer built in the speedometer dial digital display

1 - Button display to Mileage

Thus, the output field in front of the display icon It means that the works to be planned Schedule A, and - Schedule B (see. Section routine maintenance schedule). The main field of the display shows the value of path remaining before passing THEN Km (e.g., 1000), or the number of days over which the planning effort is to be made (e.g., 10). The format of the data output is determined by the operating conditions of the vehicle.

Switching display mode odometer automatically after 10 seconds or by pressing the button (1).

In case of delay period of the indicator starts flashing mode in addition, digital data is displayed in front of the sign "minus".

Also envisaged the withdrawal of service manual readings, which must first activate the instrument cluster (see. Section A combination of devices, gauges and warning lights and indicator lights), and then twice within 1 second press switch the display. Return to normal display mode (odometer) is done automatically in 10 seconds, or by pressing the same button.

Reset indicator is produced by a workshop Mercedes-Benz, which was carried out planned maintenance.

If necessary, reset the indicator can be produced in-house of the owner of a vehicle: Turn the ignition key to position 2 and immediately twice within 1 second, press the switch the display on the display screen will indicate the latest data on the Maturity planned maintenance. Turn the key to 0. Next, press and hold the button, turn the key to position 2 - on the display screen will display the highlighted period of the previous service and then, after about 10 seconds, after a beep will be displayed next term THEN - Release the button. After about 10 seconds, the display automatically switches to the odometer.

If you accidentally resetting the Maturity planned the function can be re-activated the service station Mercedes-Benz.

The running distance remaining before the next MOT determined driving style, and lies in the range from 15000 to 22500 km (365 ÷ 730 days). Economical manner of driving at medium engine speeds and avoiding short journeys contribute to its increase.

Schedule routine maintenance of the car is presented in Section routine maintenance schedule.





« previos page
Current care and maintenance
next page »
The routine maintenance schedule

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.