Removing and installing an electronic controller fan heater or air conditioner

1. Disconnect the negative (-) cable of the battery when the ignition is off. You must first remove the air filter box of the passenger compartment.

Before disconnecting the cable, find out the radio security code, if any, address to Section Replacement of the battery.

2. Remove the motor, refer to the appropriate section.

3. Remove the bolts (arrows on an illustration) and remove elektronnuyustupen adjustment (1) electric motor.

4. Disconnect the fan motor connector.

1. Installation is performed in reverse order of removal.
2. Attach a weight cable (-) battery when the ignition is switched off. Replace the cabin air filter box. If necessary, enter the code for the radio and set the time on the clock.