REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (W203, 2000 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	W203
		Introduction
		Instruction Manual
		Routine maintenance
		Engine
		Cooling and heating
		The power supply system and release
		Electric motor
		Manual gearbox
		Automatic Transmission
		Coupling and power shafts
		Brakes
		Suspension and steering
			Specifications
			Suspension front wheels
			Suspension rear wheels
				Removing and installing the rear shock absorber
				Removing and installing rear spring
			The angles of the wheels of the car
			The steering and airbags
		Body
		Onboard electric

printable version

Suspension rear wheels

Suspension rear wheels


1 - drive the rear wheels 2 - The main transfer 3 - Coil spring 4 - Shock	5 - rear axle 6 - torsion stabilizer bar 7 - arm rear suspension

Suspension rear wheel is in the form of spatial multi-link system and consists of a beam to which the bolts through the rubber bearings are mounted suspension arms. Before the beam is anti-roll bar (except model C180), which reduces the body tilt when cornering, as well as preventing the lifting of internal relative to the rotation of the rear wheel.

To cushion the body are two helical springs. Gas-filled shock absorbers are located near the springs. This design takes a little volume in the trunk or cargo bay.

« previos page
Adjustment of a backlash in the bearings of the front wheels

next page »
Removing and installing the rear shock absorber