printable version

A group of switches on the instrument panel to the left

The group includes switches the mode of functioning of lighting, adjust the position of the door mirrors and headlight wipers activated (see. Section Controls and interior equipment).

Details group setting switches on the instrument panel to the left

1 - The left lower section of the instrument panel trim 2 - a spring clamp	3 - Screw S1 - A group of switches on the instrument panel to the left

PERFORMANCE ORDER

On models corresponding complete set (code ET2) activate the service mode of the emergency call TELE AID (see. Section Activate / deactivate the service mode of the emergency call AID TELE). Turn on the auxiliary battery and connect it to a standard battery, then disconnect the negative cable last. 7 - Auxiliary battery 8 - terminal positive wire module 9 - negative terminal wire module W10 - Ground Battery Remove the left lower section (1) finishing the dashboard (see chap. Body). The need for removal from the panel (1) control module electronic ignition switch (EIS / EZS) is absent. On models 463.246 / 249 corresponding complete set remove the knee stress (see chap. Body). Remove the retaining bolt (3), press in the direction of the arrow clips (2) and hooking suitable wedge, release the assembly group of switches (S1) from the instrument panel. Installation is in the reverse order - on the model of the corresponding configuration (code ET2) deactivate service mode of TELE AID (see. Section Activate / deactivate the service mode of the emergency call AID TELE). Finally, make the DTC reading and clearing of system memory on-board self-diagnostic scanner using STAR DIAGNOSIS (6511 1801 00) (see chap. Systems of an electric motor) and enter the required basic settings avionics.