REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Micra (2002 model year)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Micra
		Introduction
		Controls and operation receptions
		Options and car routine maintenance
			general information
			General information on options and adjustments
			The routine maintenance schedule
			Check fluid level, leakage control
			Check and replacement of hoses and tubes in the engine compartment, localization of leaks
			Replacing the motor oil and oil filter
			Check headlight alignment
			Check brake system and coupling
			Checking the exhaust system
			Checking the suspension components and steering
			Check condition of protective covers of power shafts SHRUS
			Changing the transmission oil and AT RKPP
			Replacing the brake fluid and bleeding the brake system
			Replacing spark plugs
			Replacing the cabin filter (ventilation system)
			Replacement of a filtering element of an air cleaner
			Substitution coolant
			Checking the condition of tires and pressure of their rating
			Checking the status of the battery and care
			Checking the accessory drive belt and adjust its tension
			Check the status, adjustment and replacement of wiper blades
		Engine
		The engine cooling system, heating, ventilation and air conditioning
		The power supply system and exhaust
		Systems of an electric motor
		Manual box of a gear change and clutch
		Automatic Transmission
		Drive shafts, steering knuckles and Hub assembly
		Brakes
		Suspension and steering
		Body
		Onboard electric
		Diagrams

printable version

Changing the transmission oil and AT RKPP

Below is a description of the replacement of ATF. Changing the transmission oil Manual transmission is similar.

PERFORMANCE ORDER
Warm liquid ATF and turn off the engine.

Remove the drain plug and drain the ATF of prefab container. Check the condition of ATF.
Tighten the drain plug with a new sealing washer with demanded effort.
Fill AT fluid in accordance with the requirements of the Specifications.
Allow the engine to idle for about 5 minutes and check the level and condition ATF (see. Section Check of levels of liquids, the control of leaks).

« previos page
Check condition of protective covers of power shafts SHRUS

next page »
Replacing the brake fluid and bleeding the brake system