printable version

Replacing the brake pads of the front wheels

Replacement pads should be carried out simultaneously on both wheels of one axis (ie, 4 blocks).

The components of the front brake

1 - anchor bracket 2 - Guide pin 3 - Bellow 4/5 - Upper / lower pad holders 6/7 - Indoor / outdoor shoes 8 - Caliper	9 - Seal 10 - Piston 11 - Protective cap 12 - Hollow bolt 13 - Brass Washers 14 - bleeder valve

PERFORMANCE ORDER

Poddomkratte the car and remove a corresponding wheel. Remove the lid of the tank of a brake liquid. Remove the lower caliper mounting bolts. Lift the caliper and tie him to the elements of the body without straining the brake hose. Remove the anchor bracket old brake pads and holders. Put on the back surface of the new pad and mating surface holders PBC grease or silicone containing lubricant. Install the pads and holders. Lower support. If you install new pads, gently press the plunger at the same time making sure that the brake fluid poured from the tank. After installation, before the trip several times Depress the brake pedal to block occupied position.