add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Micra (2002 model year)

general info. full specifications. diagnostics. hints. tips. tricks
Nissan Micra
Home
 
Nissan
Micra
Introduction
Controls and operation receptions
Options and car routine maintenance
Engine
The engine cooling system, heating, ventilation and air conditioning
The power supply system and exhaust
Systems of an electric motor
Manual box of a gear change and clutch
Automatic Transmission
Drive shafts, steering knuckles and Hub assembly
Brakes
General information and safety measures
Removing and installing brake lines
Removing and installing brake pedal
Removal and installation of the GTZ
Removal and installation of the vacuum amplifier
Replacing the brake pads of the front wheels
Removing and installing the front brake and brake discs
Removing and installing rear brake assembly
Removal and installation of the parking brake
Removal and installation of components of system ABS
Suspension and steering
Body
Onboard electric
Diagrams
 


Hit Counter by Digits


print page printable version

Removing and installing the front brake and brake discs



Assemble the front brake shown in illustration Components of the front brake.

PERFORMANCE ORDER

  1. Poddomkratte the car and remove a corresponding wheel.
  2. Drain the brake fluid (see. Section Replacing brake fluid and bleeding the brake system).
  1. Remove the banjo bolt and anchor bolts clamps.
  1. Remove the brake disc.
  1. If necessary, remove it, remove the brake disc screws.
  1. Installation is in the reverse order. Tighten fixture with demanded effort.
  2. After installing refill and bleed the brake system (see. Section Replacing brake fluid and bleeding the brake system).




« previos page
Replacing the brake pads of the front wheels
next page »
Removing and installing rear brake assembly

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.