REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Micra (2002 model year)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Micra
		Introduction
		Controls and operation receptions
		Options and car routine maintenance
		Engine
		The engine cooling system, heating, ventilation and air conditioning
		The power supply system and exhaust
		Systems of an electric motor
		Manual box of a gear change and clutch
		Automatic Transmission
		Drive shafts, steering knuckles and Hub assembly
		Brakes
			General information and safety measures
			Removing and installing brake lines
			Removing and installing brake pedal
			Removal and installation of the GTZ
			Removal and installation of the vacuum amplifier
			Replacing the brake pads of the front wheels
			Removing and installing the front brake and brake discs
			Removing and installing rear brake assembly
			Removal and installation of the parking brake
			Removal and installation of components of system ABS
		Suspension and steering
		Body
		Onboard electric
		Diagrams

printable version

Removing and installing brake lines

Driving pads brake lines

PERFORMANCE ORDER
Drain the brake fluid (see. Section Replacing brake fluid and bleeding the brake system).

At the rear of the car ring spanner Give nuts and remove the tube from the hose tube.
Give bolts brake caliper and disconnect the brake hose from the caliper by unscrewing the banjo bolt.
Remove the retaining plate and remove the brake hose.

At the rear of the car, disconnect hoses from the pipes, remove the retaining plate and remove the hoses.
Installation is in the reverse order. Tighten fixture with demanded effort. After installation, bleed the brake (see. Section Replacing brake fluid and bleeding the brake system).

« previos page
General information and safety measures

next page »
Removing and installing brake pedal