printable version
Using the radio
Radio receiver AM-UKV with electronic adjustment 1. Auto Adjust button 2. Regulirvka tone 3. Handle turn the receiver on, volume control and balance the left and right speakers 4. Set up with decreasing frequency reception 5. Setup Button
| 6. Set up with increasing frequency reception 7. Mode Button AM or FM (VHF) 8. Select Button range 9. Display 10. Knpka select Stereo / Mono |
PERFORMANCE ORDER | 1. Turn on the receiver by turning the knob ?�PWR.VOL?� clockwise. | 2. Adjust the volume, then turning the knob ?�PWR.VOL?�. | 3. Tune to the desired station (see. Subsection 1.4.2, subsection 1.4.3). | 4. To receive VHF (FM) radio stations with switch to receive mode VHF (FM), select the stereo or mono reception. If it is broadcast on FM stereo, then the receiver will automatically switch to stereo reception, the display at the same time the symbol ST. If the signal is weak, switch to mono mode by pressing the appropriate button. Appears in the display MONO. | 5. Set the tone and balance (see. Subsection 1.4.5, subsection 1.4.6). | 6. To turn off the radio, turn the knob ?�PWR.VOL?� counterclockwise. |
|
|