REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Sunny
		Instructions
		Maintenance
		Engines
		Cooling
		Heating and ventilation system
		Fuel and exhaust system
			Carbureted engines
			Engines with fuel injection system
				Technical data
				Air filter
				The accelerator cable
				Throttle pedal
				Fuel
				Fuel Injection System
				Decompression of the fuel system
				Fuel pump
				Fuel Level Sensor
				Fuel tank
				Fuel Injection System
				Throttle Body
				Units of the fuel injection system
				Suction collector
				An exhaust manifold
				Exhaust system
			The power supply / exhaust
			Emission of exhaust gases
		The system of the engine is started
		Coupling
		Transmissions
		Axles
		Brakes
		Suspension and steering
		Body
		Electrical

An exhaust manifold

Withdrawal

PERFORMANCE ORDER

1. Disconnect the exhaust gas sensor from the wiring.
	2. Remove the screws and remove the cover collector.
	3. Remove the nut and remove the choke tube recycling.
4. Turn on the hand brake and lift the front of the vehicle.
5. Remove the nut and bolt and remove a reception exhaust pipe, remove the gasket.
	6. Remove the nuts and bolts of the exhaust manifold to the cylinder head in the reverse order.
7. Remove the manifold and gasket.

Setting

PERFORMANCE ORDER

1. Installation is performed in reverse order.
2. Before assembly, replace all gaskets, thoroughly clean split plane, replace or restore damaged studs.
	3. Tighten the bolts and nuts with a torque wrench in the specified sequence.